Daily Papers

The Mixture of Experts architecture allows for outrageously large neural networks by scaling model parameter size independently from computational demand (FLOPs). However, current DNN frameworks cannot effectively support the dynamic data flow in Mixture of Experts, and implementations on top of these frameworks need to use workarounds that introduce significant overheads. To address the limitation of these frameworks, we present DynaMoE, a DNN library that uses dynamic recompilations to optimize and adapt the use of computational resources to the dynamic needs of Mixture of Experts models. Our evaluation shows that DynaMoE achieves a 1.8x speedup and supports 2.3x larger model sizes when compared to existing MoE systems, even when not using recompilations. We then present further optimizations enabled by dynamic recompilations that yield an additional 1.7x speedup while simultaneously reducing memory pressure and improving model quality.

Decompilation transforms compiled code back into a high-level programming language for analysis when source code is unavailable. Previous work has primarily focused on enhancing decompilation performance by increasing the scale of model parameters or training data for pre-training. Based on the characteristics of the decompilation task, we propose two methods: (1) Without fine-tuning, the Self-Constructed Context Decompilation (sc^2dec) method recompiles the LLM's decompilation results to construct pairs for in-context learning, helping the model improve decompilation performance. (2) Fine-grained Alignment Enhancement (FAE), which meticulously aligns assembly code with source code at the statement level by leveraging debugging information, is employed during the fine-tuning phase to achieve further improvements in decompilation. By integrating these two methods, we achieved a Re-Executability performance improvement of approximately 7.35\% on the Decompile-Eval benchmark, establishing a new state-of-the-art performance of 55.03\%.

Efficient KV cache management in LLMs is crucial for long-context tasks like RAG and summarization. Existing KV cache compression methods enforce a fixed pattern, neglecting task-specific characteristics and reducing the retention of essential information. However, we observe distinct activation patterns across layers in various tasks, highlighting the need for adaptive strategies tailored to each task's unique demands. Based on this insight, we propose DynamicKV, a method that dynamically optimizes token retention by adjusting the number of tokens retained at each layer to adapt to the specific task. DynamicKV establishes global and per-layer maximum KV cache budgets, temporarily retaining the maximum budget for the current layer, and periodically updating the KV cache sizes of all preceding layers during inference. Our method retains only 1.7% of the KV cache size while achieving ~85% of the Full KV cache performance on LongBench. Notably, even under extreme compression (0.9%), DynamicKV surpasses state-of-the-art (SOTA) methods by 11% in the Needle-in-a-Haystack test using Mistral-7B-Instruct-v0.2. The code will be released.

Large Language Models (LLMs) exhibit remarkable code generation capabilities but falter when adapting to frequent updates in external library APIs. This critical limitation, stemming from reliance on outdated API knowledge from their training data, even with access to current documentation, impedes reliable code generation in dynamic environments. To tackle this issue, we propose ReCode (rule-based Reinforcement learning for Code Update), a novel framework that mimics human programmer adaptation to API changes. Specifically, we construct a dataset of approximately 2,000 data entries to train the LLMs to perform version migration based on updated information. Then, we introduce a modified string similarity metric for code evaluation as the reward for reinforcement learning. Our experiments demonstrate that ReCode substantially boosts LLMs' code generation performance in dynamic API scenarios, especially on the unseen CodeUpdateArena task. Crucially, compared to supervised fine-tuning, ReCode has less impact on LLMs' general code generation abilities. We apply ReCode on various LLMs and reinforcement learning algorithms (GRPO and DAPO), all achieving consistent improvements. Notably, after training, Qwen2.5-Coder-7B outperforms that of the 32B parameter code instruction-tuned model and the reasoning model with the same architecture. Code is available at https://github.com/zjunlp/ReCode.

Decompilation aims to restore compiled code to human-readable source code, but struggles with details like names and structure. Large language models (LLMs) show promise for programming tasks, motivating their application to decompilation. However, there does not exist any open-source LLM for decompilation. Moreover, existing decompilation evaluation systems mainly consider token-level accuracy and largely ignore code executability, which is the most important feature of any program. Therefore, we release the first open-access decompilation LLMs ranging from 1B to 33B pre-trained on 4 billion tokens of C source code and the corresponding assembly code. The open-source LLMs can serve as baselines for further development in the field. To ensure practical program evaluation, we introduce Decompile-Eval, the first dataset that considers re-compilability and re-executability for decompilation. The benchmark emphasizes the importance of evaluating the decompilation model from the perspective of program semantics. Experiments indicate that our LLM4Decompile has demonstrated the capability to accurately decompile 21% of the assembly code, which achieves a 50% improvement over GPT-4. Our code, dataset, and models are released at https://github.com/albertan017/LLM4Decompile

Dynamic Algorithm Configuration (DAC) aims to dynamically control a target algorithm's hyperparameters in order to improve its performance. Several theoretical and empirical results have demonstrated the benefits of dynamically controlling hyperparameters in domains like evolutionary computation, AI Planning or deep learning. Replicating these results, as well as studying new methods for DAC, however, is difficult since existing benchmarks are often specialized and incompatible with the same interfaces. To facilitate benchmarking and thus research on DAC, we propose DACBench, a benchmark library that seeks to collect and standardize existing DAC benchmarks from different AI domains, as well as provide a template for new ones. For the design of DACBench, we focused on important desiderata, such as (i) flexibility, (ii) reproducibility, (iii) extensibility and (iv) automatic documentation and visualization. To show the potential, broad applicability and challenges of DAC, we explore how a set of six initial benchmarks compare in several dimensions of difficulty.

DL compiler's primary function is to translate DNN programs written in high-level DL frameworks such as PyTorch and TensorFlow into portable executables. These executables can then be flexibly executed by the deployed host programs. However, existing DL compilers rely on a tracing mechanism, which involves feeding a runtime input to a neural network program and tracing the program execution paths to generate the computational graph necessary for compilation. Unfortunately, this mechanism falls short when dealing with modern dynamic neural networks (DyNNs) that possess varying computational graphs depending on the inputs. Consequently, conventional DL compilers struggle to accurately compile DyNNs into executable code. To address this limitation, we propose \tool, a general approach that enables any existing DL compiler to successfully compile DyNNs. \tool tackles the dynamic nature of DyNNs by introducing a compilation mechanism that redistributes the control and data flow of the original DNN programs during the compilation process. Specifically, \tool develops program analysis and program transformation techniques to convert a dynamic neural network into multiple sub-neural networks. Each sub-neural network is devoid of conditional statements and is compiled independently. Furthermore, \tool synthesizes a host module that models the control flow of the DyNNs and facilitates the invocation of the sub-neural networks. Our evaluation demonstrates the effectiveness of \tool, achieving a 100\% success rate in compiling all dynamic neural networks. Moreover, the compiled executables generated by \tool exhibit significantly improved performance, running between 1.12times and 20.21times faster than the original DyNNs executed on general-purpose DL frameworks.

Dynamic shape computations have become critical in modern machine learning workloads, especially in emerging large language models. The success of these models has driven demand for deploying them to a diverse set of backend environments. In this paper, we present Relax, a compiler abstraction for optimizing end-to-end dynamic machine learning workloads. Relax introduces first-class symbolic shape annotations to track dynamic shape computations globally across the program. It also introduces a cross-level abstraction that encapsulates computational graphs, loop-level tensor programs, and library calls in a single representation to enable cross-level optimizations. We build an end-to-end compilation framework using the proposed approach to optimize dynamic shape models. Experimental results on large language models show that Relax delivers performance competitive with state-of-the-art hand-optimized systems across platforms and enables deployment of emerging dynamic models to a broader set of environments, including mobile phones, embedded devices, and web browsers.

Decompilers are important tools for reverse engineers that help them analyze software at a higher level of abstraction than assembly. Unfortunately, because compilation is lossy, deterministic decompilers produce code that is missing many of the details that make source code readable in the first place, like variable names and types. Neural decompilers, on the other hand, offer the ability to statistically fill in these details. Existing work in neural decompilation, however, suffers from substantial drawbacks that limits its ability to handle real code: it is unable to handle user-defined composite types, which are essential to fully specifying many functions' semantics, or require test cases. In this work, we introduce a new training process to finetune any LLM into a neural decompiler capable of generating the appropriate user-defined types alongside the decompilation. We introduce a new dataset, Realtype, that includes substantially more complicated and realistic types than existing neural decompilation benchmarks. Motivated by the intuition that different parts of data structures can be operated upon by different parts of the program, we show that interprocedural context can help improve neural decompilers' ability to handle user-defined types. We show that our training process yields state-of-the-art results in neural decompilation. We also publicly release the Idioms series of finetuned neural decompilation models in support of open science. In summary, we identify the need for joint code and type prediction, show that it is a hard problem, and take the first steps towards solving it.

The goal of decompilation is to convert compiled low-level code (e.g., assembly code) back into high-level programming languages, enabling analysis in scenarios where source code is unavailable. This task supports various reverse engineering applications, such as vulnerability identification, malware analysis, and legacy software migration. The end-to-end decompile method based on large langauge models (LLMs) reduces reliance on additional tools and minimizes manual intervention due to its inherent properties. However, previous end-to-end methods often lose critical information necessary for reconstructing control flow structures and variables when processing binary files, making it challenging to accurately recover the program's logic. To address these issues, we propose the ReF Decompile method, which incorporates the following innovations: (1) The Relabelling strategy replaces jump target addresses with labels, preserving control flow clarity. (2) The Function Call strategy infers variable types and retrieves missing variable information from binary files. Experimental results on the Humaneval-Decompile Benchmark demonstrate that ReF Decompile surpasses comparable baselines and achieves state-of-the-art (SOTA) performance of 61.43%.

We formulate the predicted-updates dynamic model, one of the first beyond-worst-case models for dynamic algorithms, which generalizes a large set of well-studied dynamic models including the offline dynamic, incremental, and decremental models to the fully dynamic setting when given predictions about the update times of the elements. In the most basic form of our model, we receive a set of predicted update times for all of the updates that occur over the event horizon. We give a novel framework that "lifts" offline divide-and-conquer algorithms into the fully dynamic setting with little overhead. Using this, we are able to interpolate between the offline and fully dynamic settings; when the ell_1 error of the prediction is linear in the number of updates, we achieve the offline runtime of the algorithm (up to poly log n factors). Provided a fully dynamic backstop algorithm, our algorithm will never do worse than the backstop algorithm regardless of the prediction error. Furthermore, our framework achieves a smooth linear trade-off between ell_1 error in the predictions and runtime. These correspond to the desiderata of consistency, robustness, and graceful degradation of the algorithms-with-predictions literature. We further extend our techniques to incremental and decremental settings, transforming algorithms in these settings when given predictions of only the deletion and insertion times, respectively. Our framework is general, and we apply it to obtain improved efficiency bounds over the state-of-the-art dynamic algorithms for a variety of problems including triconnectivity, planar digraph all pairs shortest paths, k-edge connectivity, and others, for prediction error of reasonable magnitude.

Decompilation aims to recover the source code form of a binary executable. It has many security applications, such as malware analysis, vulnerability detection, and code hardening. A prominent challenge in decompilation is to recover variable names. We propose a novel technique that leverages the strengths of generative models while mitigating model biases. We build a prototype, GenNm, from pre-trained generative models CodeGemma-2B, CodeLlama-7B, and CodeLlama-34B. We finetune GenNm on decompiled functions and teach models to leverage contextual information. GenNm includes names from callers and callees while querying a function, providing rich contextual information within the model's input token limitation. We mitigate model biases by aligning the output distribution of models with symbol preferences of developers. Our results show that GenNm improves the state-of-the-art name recovery precision by 5.6-11.4 percentage points on two commonly used datasets and improves the state-of-the-art by 32% (from 17.3% to 22.8%) in the most challenging setup where ground-truth variable names are not seen in the training dataset.

Autoregressive video generation paradigms offer theoretical promise for long video synthesis, yet their practical deployment is hindered by the computational burden of sequential iterative denoising. While cache reuse strategies can accelerate generation by skipping redundant denoising steps, existing methods rely on coarse-grained chunk-level skipping that fails to capture fine-grained pixel dynamics. This oversight is critical: pixels with high motion require more denoising steps to prevent error accumulation, while static pixels tolerate aggressive skipping. We formalize this insight theoretically by linking cache errors to residual instability, and propose MotionCache, a motion-aware cache framework that exploits inter-frame differences as a lightweight proxy for pixel-level motion characteristics. MotionCache employs a coarse-to-fine strategy: an initial warm-up phase establishes semantic coherence, followed by motion-weighted cache reuse that dynamically adjusts update frequencies per token. Extensive experiments on state-of-the-art models like SkyReels-V2 and MAGI-1 demonstrate that MotionCache achieves significant speedups of 6.28times and 1.64times respectively, while effectively preserving generation quality (VBench: 1%downarrow and 0.01%downarrow respectively). The code is available at https://github.com/ywlq/MotionCache.

Diffusion models are widely recognized for their ability to generate high-fidelity images. Despite the excellent performance and scalability of the Diffusion Transformer (DiT) architecture, it applies fixed compression across different image regions during the diffusion process, disregarding the naturally varying information densities present in these regions. However, large compression leads to limited local realism, while small compression increases computational complexity and compromises global consistency, ultimately impacting the quality of generated images. To address these limitations, we propose dynamically compressing different image regions by recognizing the importance of different regions, and introduce a novel two-stage framework designed to enhance the effectiveness and efficiency of image generation: (1) Dynamic VAE (DVAE) at first stage employs a hierarchical encoder to encode different image regions at different downsampling rates, tailored to their specific information densities, thereby providing more accurate and natural latent codes for the diffusion process. (2) Dynamic Diffusion Transformer (D^2iT) at second stage generates images by predicting multi-grained noise, consisting of coarse-grained (less latent code in smooth regions) and fine-grained (more latent codes in detailed regions), through an novel combination of the Dynamic Grain Transformer and the Dynamic Content Transformer. The strategy of combining rough prediction of noise with detailed regions correction achieves a unification of global consistency and local realism. Comprehensive experiments on various generation tasks validate the effectiveness of our approach. Code will be released at https://github.com/jiawn-creator/Dynamic-DiT.

Recent advances in LLM-based decompilers have been shown effective to convert low-level binaries into human-readable source code. However, there still lacks a comprehensive benchmark that provides large-scale binary-source function pairs, which is critical for advancing the LLM decompilation technology. Creating accurate binary-source mappings incurs severe issues caused by complex compilation settings and widespread function inlining that obscure the correspondence between binaries and their original source code. Previous efforts have either relied on used contest-style benchmarks, synthetic binary-source mappings that diverge significantly from the mappings in real world, or partially matched binaries with only code lines or variable names, compromising the effectiveness of analyzing the binary functionality. To alleviate these issues, we introduce Decompile-Bench, the first open-source dataset comprising two million binary-source function pairs condensed from 100 million collected function pairs, i.e., 450GB of binaries compiled from permissively licensed GitHub projects. For the evaluation purposes, we also developed a benchmark Decompile-Bench-Eval including manually crafted binaries from the well-established HumanEval and MBPP, alongside the compiled GitHub repositories released after 2025 to mitigate data leakage issues. We further explore commonly-used evaluation metrics to provide a thorough assessment of the studied LLM decompilers and find that fine-tuning with Decompile-Bench causes a 20% improvement over previous benchmarks in terms of the re-executability rate. Our code and data has been released in HuggingFace and Github. https://github.com/albertan017/LLM4Decompile

Large Language Models (LLMs) have shown remarkable results on various complex reasoning benchmarks. The reasoning capabilities of LLMs enable them to execute function calls, using user-provided functions to overcome their inherent limitations, such as knowledge cutoffs, poor arithmetic skills, or lack of access to private data. This development has expanded LLMs' scope to include multi-function calling, where LLMs are equipped with a variety of functions and select the proper functions based on the context. Multi-function calling abilities of LLMs have catalyzed LLM-based software development, allowing them to tackle more complex problems. However, current methods for multi-function calling often require sequential reasoning and acting for each function which can result in high latency, cost, and sometimes inaccurate behavior. To address this, we introduce LLMCompiler, which executes functions in parallel to efficiently orchestrate multi-function calling. Drawing from the principles of classical compilers, LLMCompiler streamlines parallel function calling with three components: (i) an LLM Planner, formulating execution strategies and dependencies; (ii) a Task Fetching Unit, dispatching function calling tasks; and (iii) an Executor, executing these tasks in parallel. LLMCompiler automatically computes an optimized orchestration for the function calls and can be used with open-source models such as LLaMA-2. We have benchmarked LLMCompiler on a range of tasks including cases with non-trivial inter-dependency between function calls, as well as cases that require dynamic replanning based on intermediate results. We observe consistent latency speedup of up to 3.7x, cost savings of up to 6.7x, and accuracy improvement of up to ~9% as compared to ReAct. Additionally, LLMCompiler achieves up to 1.35x latency gain over OpenAI's recent parallel function calling, while achieving similar accuracy.

Generative models have emerged as a powerful paradigm for solving physics systems and modeling complex spatiotemporal dynamics. However, achieving high physical accuracy without incurring high computational cost remains a fundamental challenge, as existing approaches face a critical speed-fidelity trade-off. In this work, we introduce Recursive Flow Matching (RecFM), a generative framework for forecasting complex spatiotemporal dynamics. RecFM enforces self-consistency to align trajectories across discretization scales, reducing discretization errors and improving performance across metrics for physics-based tasks. To our knowledge, this is the first method to achieve high-fidelity one- and few-step (2-4 step) dynamic generation for scientific systems with performance comparable to state-of-the-art multi-step solvers. Across challenging scientific benchmarks, RecFM achieves up to a 20times speedup over leading diffusion-based emulators while improving predictive accuracy. Furthermore, RecFM reduces mean squared error by over 15% compared to vanilla flow matching, offering a scalable and efficient solution for real-time scientific emulation.

Over two billion Apple devices ship with a Neural Processing Unit (NPU) - the Apple Neural Engine (ANE) - yet this accelerator remains largely unused for large language model workloads. CoreML, Apple's public ML framework, imposes opaque abstractions that prevent direct ANE programming and do not support on-device training. We present Orion, to our knowledge the first open end-to-end system that combines direct ANE execution, a compiler pipeline, and stable multi-step training with checkpoint resume in a single native runtime, bypassing CoreML entirely via Apple's private _ANEClient and _ANECompiler APIs. Building on prior characterization work by maderix, we extend public knowledge of ANE constraints to a catalog of 20 restrictions on MIL IR programs, memory layout, compilation limits, and numerical behavior, including 14 previously undocumented constraints discovered during Orion development. Orion includes a compiler that lowers a graph IR through five optimization passes to ANE-native MIL and a runtime that manages IOSurface-backed zero-copy tensor I/O, program caching, and delta compilation for weight updates. Because the ANE bakes weights at compile time, naive training normally requires full recompilation per step (~4.2 s). We show that compiled programs can instead be updated by unloading, patching weight files, and reloading, bypassing ANECCompile() and reducing recompilation from 4,200 ms to 494 ms per step (8.5x), yielding a 3.8x training speedup. On an M4 Max, Orion achieves 170+ tokens/s for GPT-2 124M inference and demonstrates stable training of a 110M-parameter transformer on TinyStories for 1,000 steps in 22 minutes with zero NaN occurrences. We also present LoRA adapter-as-input, enabling hot-swap of adapters via IOSurface inputs without recompilation.

LiDAR scene generation has been developing rapidly recently. However, existing methods primarily focus on generating static and single-frame scenes, overlooking the inherently dynamic nature of real-world driving environments. In this work, we introduce DynamicCity, a novel 4D LiDAR generation framework capable of generating large-scale, high-quality LiDAR scenes that capture the temporal evolution of dynamic environments. DynamicCity mainly consists of two key models. 1) A VAE model for learning HexPlane as the compact 4D representation. Instead of using naive averaging operations, DynamicCity employs a novel Projection Module to effectively compress 4D LiDAR features into six 2D feature maps for HexPlane construction, which significantly enhances HexPlane fitting quality (up to 12.56 mIoU gain). Furthermore, we utilize an Expansion & Squeeze Strategy to reconstruct 3D feature volumes in parallel, which improves both network training efficiency and reconstruction accuracy than naively querying each 3D point (up to 7.05 mIoU gain, 2.06x training speedup, and 70.84% memory reduction). 2) A DiT-based diffusion model for HexPlane generation. To make HexPlane feasible for DiT generation, a Padded Rollout Operation is proposed to reorganize all six feature planes of the HexPlane as a squared 2D feature map. In particular, various conditions could be introduced in the diffusion or sampling process, supporting versatile 4D generation applications, such as trajectory- and command-driven generation, inpainting, and layout-conditioned generation. Extensive experiments on the CarlaSC and Waymo datasets demonstrate that DynamicCity significantly outperforms existing state-of-the-art 4D LiDAR generation methods across multiple metrics. The code will be released to facilitate future research.

Recent 4D dynamic scene editing methods require editing thousands of 2D images used for dynamic scene synthesis and updating the entire scene with additional training loops, resulting in several hours of processing to edit a single dynamic scene. Therefore, these methods are not scalable with respect to the temporal dimension of the dynamic scene (i.e., the number of timesteps). In this work, we propose Instruct-4DGS, an efficient dynamic scene editing method that is more scalable in terms of temporal dimension. To achieve computational efficiency, we leverage a 4D Gaussian representation that models a 4D dynamic scene by combining static 3D Gaussians with a Hexplane-based deformation field, which captures dynamic information. We then perform editing solely on the static 3D Gaussians, which is the minimal but sufficient component required for visual editing. To resolve the misalignment between the edited 3D Gaussians and the deformation field, which may arise from the editing process, we introduce a refinement stage using a score distillation mechanism. Extensive editing results demonstrate that Instruct-4DGS is efficient, reducing editing time by more than half compared to existing methods while achieving high-quality edits that better follow user instructions. Code and results: https://hanbyelcho.info/instruct-4dgs/

WebAssembly (abbreviated Wasm) has emerged as a cornerstone of web development, offering a compact binary format that allows high-performance applications to run at near-native speeds in web browsers. Despite its advantages, Wasm's binary nature presents significant challenges for developers and researchers, particularly regarding readability when debugging or analyzing web applications. Therefore, effective decompilation becomes crucial. Unfortunately, traditional decompilers often struggle with producing readable outputs. While some large language model (LLM)-based decompilers have shown good compatibility with general binary files, they still face specific challenges when dealing with Wasm. In this paper, we introduce a novel approach, WaDec, which is the first use of a fine-tuned LLM to interpret and decompile Wasm binary code into a higher-level, more comprehensible source code representation. The LLM was meticulously fine-tuned using a specialized dataset of wat-c code snippets, employing self-supervised learning techniques. This enables WaDec to effectively decompile not only complete wat functions but also finer-grained wat code snippets. Our experiments demonstrate that WaDec markedly outperforms current state-of-the-art tools, offering substantial improvements across several metrics. It achieves a code inflation rate of only 3.34%, a dramatic 97% reduction compared to the state-of-the-art's 116.94%. Unlike baselines' output that cannot be directly compiled or executed, WaDec maintains a recompilability rate of 52.11%, a re-execution rate of 43.55%, and an output consistency of 27.15%. Additionally, it significantly exceeds state-of-the-art performance in AST edit distance similarity by 185%, cyclomatic complexity by 8%, and cosine similarity by 41%, achieving an average code similarity above 50%.

Prevailing quantization techniques in Learned Image Compression (LIC) typically employ a static, uniform bit-width across all layers, failing to adapt to the highly diverse data distributions and sensitivity characteristics inherent in LIC models. This leads to a suboptimal trade-off between performance and efficiency. In this paper, we introduce DynaQuant, a novel framework for dynamic mixed-precision quantization that operates on two complementary levels. First, we propose content-aware quantization, where learnable scaling and offset parameters dynamically adapt to the statistical variations of latent features. This fine-grained adaptation is trained end-to-end using a novel Distance-aware Gradient Modulator (DGM), which provides a more informative learning signal than the standard Straight-Through Estimator. Second, we introduce a data-driven, dynamic bit-width selector that learns to assign an optimal bit precision to each layer, dynamically reconfiguring the network's precision profile based on the input data. Our fully dynamic approach offers substantial flexibility in balancing rate-distortion (R-D) performance and computational cost. Experiments demonstrate that DynaQuant achieves rd performance comparable to full-precision models while significantly reducing computational and storage requirements, thereby enabling the practical deployment of advanced LIC on diverse hardware platforms.

Autoregressive models, often built on Transformer architectures, represent a powerful paradigm for generating ultra-long videos by synthesizing content in sequential chunks. However, this sequential generation process is notoriously slow. While caching strategies have proven effective for accelerating traditional video diffusion models, existing methods assume uniform denoising across all frames-an assumption that breaks down in autoregressive models where different video chunks exhibit varying similarity patterns at identical timesteps. In this paper, we present FlowCache, the first caching framework specifically designed for autoregressive video generation. Our key insight is that each video chunk should maintain independent caching policies, allowing fine-grained control over which chunks require recomputation at each timestep. We introduce a chunkwise caching strategy that dynamically adapts to the unique denoising characteristics of each chunk, complemented by a joint importance-redundancy optimized KV cache compression mechanism that maintains fixed memory bounds while preserving generation quality. Our method achieves remarkable speedups of 2.38 times on MAGI-1 and 6.7 times on SkyReels-V2, with negligible quality degradation (VBench: 0.87 increase and 0.79 decrease respectively). These results demonstrate that FlowCache successfully unlocks the potential of autoregressive models for real-time, ultra-long video generation-establishing a new benchmark for efficient video synthesis at scale. The code is available at https://github.com/mikeallen39/FlowCache.

LLM-based workflows compose specialized agents to execute complex tasks, and these agents usually share substantial context, allowing KV-Cache reuse to save computation. Existing approaches either manage KV-Cache at agent level and fail to exploit the reuse opportunities within workflows, or manage cache at the workflow level but assume that each workflow calls a static sequence of agents. However, practical workflows are typically dynamic, where the sequence of invoked agents and thus induced cache reuse opportunities depend on the context of each task. To serve such dynamic workflows efficiently, we build a system dubbed PBKV (Prediction-Based KV-Cache Management). For each workflow, PBKV predicts the agent invocations in several future steps by fusing the guidance from historical workflows and context of the target workflow. Based on the predictions, PBKV estimates the reuse potential of cache entries and keeps the high-potential entries in GPU memory. To be robust to prediction errors, PBKV utilizes the predictions conservatively during both cache eviction and prefetching. Experiments on three workflow benchmarks show that PBKV achieves up to 1.85times speedup over LRU on dynamic workflows, and up to 1.26times speedup over the SOTA baseline KVFlow on the static workflow.

Modern LLM agents increasingly rely on dynamic structured generation, such as tool calling and response protocols. Unlike traditional structured generation with static structures, these workloads vary both across requests and within a request, posing new challenges to existing engines. We present XGrammar-2, a structured generation engine for dynamic agentic workloads. Our design is based on two key ideas: first-class support for tag-triggered structure switching, and fine-grained reuse across requests with different output structures. Concretely, XGrammar-2 introduces TagDispatch for dynamic structural dispatching and Cross-Grammar Cache for substructure-level cache reuse across grammars. It further improves efficiency with an Earley-based adaptive token mask cache, just-in-time compilation, and repetition state compression. Experiments show that XGrammar-2 achieves over 6x faster compilation than prior structured generation engines, and incurs near-zero end-to-end overhead in modern LLM serving systems.

Structured LLM workflows, where specialized LLM sub-agents execute according to a predefined graph, have become a powerful abstraction for solving complex tasks. Optimizing such workflows, i.e., selecting configurations for each sub-agent to balance accuracy and latency, is challenging due to the combinatorial design space over model choices, reasoning budgets, and workflow structures. Existing cost-aware methods largely treat workflow optimization as a routing problem, selecting a configuration at inference time for each query according to the accuracy-latency objective used during training. We argue that structured LLM workflows can also be optimized from a compilation perspective: before deployment, the system can globally explore the workflow design space and construct a reusable set of workflow-level configurations spanning diverse accuracy-latency trade-offs. Drawing inspiration from machine learning compilers, we introduce FlowCompile, a structured LLM workflow compiler that performs compile-time design space exploration to identify a high-quality, reusable trade-off set. FlowCompile decomposes a workflow into sub-agents, profiles each sub-agent under diverse configurations, and composes these measurements through a structure-aware proxy to estimate workflow-level accuracy and latency. It then identifies diverse high-quality configurations in a single compile-time pass, without retraining or online adaptation. Experiments across diverse workflows and challenging benchmarks show that FlowCompile consistently outperforms heuristically optimized workflow configurations and routing-based baselines, delivering up to 6.4x speedup. The compiled configuration set further serves as a reusable optimization artifact, enabling flexible deployment under varying runtime preferences and supporting downstream selection or routing.

The rapid evolution of software libraries presents a significant challenge for code generation models, which must adapt to frequent version updates while maintaining compatibility with previous versions. Existing code completion benchmarks often overlook this dynamic aspect, and the one that does consider it relies on static code prediction tasks without execution-based evaluation, offering a limited perspective on a model's practical usability. To address this gap, we introduce \GitChameleon{}, a novel, manually curated dataset comprising 116 Python code completion problems, each conditioned on specific library versions and accompanied by executable unit tests. is designed to rigorously assess the ability of modern large language models (LLMs) to generate version-specific code that is not only syntactically correct but also functionally accurate upon execution. Our comprehensive evaluations reveal that state-of-the-art LLMs struggle with this task; for instance, GPT-4o achieves a pass@10 of only 39.9\% (43.7\% when provided with error feedback), highlighting the complexity of the problem and the limitations of current models. By providing an execution-based benchmark that emphasizes the dynamic nature of code libraries, serves as a critical tool to advance the development of more adaptable and reliable code generation models. For facilitation for further exploration of version-conditioned code generation, we make our code repository publicly accessible at https://github.com/NizarIslah/GitChameleon.

We address the problem of dynamic scene reconstruction from sparse-view videos. Prior work often requires dense multi-view captures with hundreds of calibrated cameras (e.g. Panoptic Studio). Such multi-view setups are prohibitively expensive to build and cannot capture diverse scenes in-the-wild. In contrast, we aim to reconstruct dynamic human behaviors, such as repairing a bike or dancing, from a small set of sparse-view cameras with complete scene coverage (e.g. four equidistant inward-facing static cameras). We find that dense multi-view reconstruction methods struggle to adapt to this sparse-view setup due to limited overlap between viewpoints. To address these limitations, we carefully align independent monocular reconstructions of each camera to produce time- and view-consistent dynamic scene reconstructions. Extensive experiments on PanopticStudio and Ego-Exo4D demonstrate that our method achieves higher quality reconstructions than prior art, particularly when rendering novel views. Code, data, and data-processing scripts are available on https://github.com/ImNotPrepared/MonoFusion.

LLM agents increasingly adopt skills as a reusable unit of composition. While skills are shared across diverse agent platforms, current systems treat them as raw context, causing the same skill to behave inconsistently for different agents. This fragility undermines skill portability and execution efficiency. To address this challenge, we analyze 118,000 skills and draw inspiration from traditional compiler design. We treat skills as code and LLMs as heterogeneous processors. To make portability actionable, we decompose a skill's requirements into a set of primitive capabilities, and measure how well each model-harness pair supports them. Based on these capability profiles, we propose SkVM, a compilation and runtime system designed for portable and efficient skill execution. At compile time, SkVM performs capability-based compilation, environment binding, and concurrency extraction. At runtime, SkVM applies JIT code solidification and adaptive recompilation for performance optimization. We evaluate SkVM across eight LLMs of varying scales and three agent harnesses, covering SkillsBench and representative skill tasks. Results demonstrate that SkVM significantly improves task completion rates across different models and environments while reducing token consumption by up to 40%. In terms of performance, SkVM achieves up to 3.2x speedup with enhanced parallelism, and 19-50x latency reduction through code solidification.

Reconstructing dense geometry for dynamic scenes from a monocular video is a critical yet challenging task. Recent memory-based methods enable efficient online reconstruction, but they fundamentally suffer from a Memory Demand Dilemma: The memory representation faces an inherent conflict between the long-term stability required for static structures and the rapid, high-fidelity detail retention needed for dynamic motion. This conflict forces existing methods into a compromise, leading to either geometric drift in static structures or blurred, inaccurate reconstructions of dynamic objects. To address this dilemma, we propose Mem4D, a novel framework that decouples the modeling of static geometry and dynamic motion. Guided by this insight, we design a dual-memory architecture: 1) The Transient Dynamics Memory (TDM) focuses on capturing high-frequency motion details from recent frames, enabling accurate and fine-grained modeling of dynamic content; 2) The Persistent Structure Memory (PSM) compresses and preserves long-term spatial information, ensuring global consistency and drift-free reconstruction for static elements. By alternating queries to these specialized memories, Mem4D simultaneously maintains static geometry with global consistency and reconstructs dynamic elements with high fidelity. Experiments on challenging benchmarks demonstrate that our method achieves state-of-the-art or competitive performance while maintaining high efficiency. Codes will be publicly available.

Code large language models (LLMs) enhance programming by understanding and generating code across languages, offering intelligent feedback, bug detection, and code updates through reflection, improving development efficiency and accessibility. While benchmarks (e.g. HumanEval/LiveCodeBench) evaluate code generation and real-world relevance, previous works ignore the scenario of modifying code in repositories. Considering challenges remaining in improving reflection capabilities and avoiding data contamination in dynamic benchmarks, we introduce LiveRepoReflection, a challenging benchmark for evaluating code understanding and generation in multi-file repository contexts, featuring 1,888 rigorously filtered test cases across 6 programming languages to ensure diversity, correctness, and high difficulty. Further, we create RepoReflection-Instruct, a large-scale, quality-filtered instruction-tuning dataset derived from diverse sources, used to train RepoReflectionCoder through a two-turn dialogue process involving code generation and error-driven repair. The leaderboard evaluates over 40 LLMs to reflect the model performance of repository-based code reflection.

Diffusion models suffer from substantial computational overhead due to their inherently iterative inference process. While feature caching offers a promising acceleration strategy by reusing intermediate outputs across timesteps, naive reuse often incurs noticeable quality degradation. In this work, we formally analyze the cumulative error introduced by caching and decompose it into two principal components: feature shift error, caused by inaccuracies in cached outputs, and step amplification error, which arises from error propagation under fixed timestep schedules. To address these issues, we propose ERTACache, a principled caching framework that jointly rectifies both error types. Our method employs an offline residual profiling stage to identify reusable steps, dynamically adjusts integration intervals via a trajectory-aware correction coefficient, and analytically approximates cache-induced errors through a closed-form residual linearization model. Together, these components enable accurate and efficient sampling under aggressive cache reuse. Extensive experiments across standard image and video generation benchmarks show that ERTACache achieves up to 2x inference speedup while consistently preserving or even improving visual quality. Notably, on the state-of-the-art Wan2.1 video diffusion model, ERTACache delivers 2x acceleration with minimal VBench degradation, effectively maintaining baseline fidelity while significantly improving efficiency. The code is available at https://github.com/bytedance/ERTACache.

Model compression is essential in the deployment of large Computer Vision models on embedded devices. However, static optimization techniques (e.g. pruning, quantization, etc.) neglect the fact that different inputs have different complexities, thus requiring different amount of computations. Dynamic Neural Networks allow to condition the number of computations to the specific input. The current literature on the topic is very extensive and fragmented. We present a comprehensive survey that synthesizes and unifies existing Dynamic Neural Networks research in the context of Computer Vision. Additionally, we provide a logical taxonomy based on which component of the network is adaptive: the output, the computation graph or the input. Furthermore, we argue that Dynamic Neural Networks are particularly beneficial in the context of Sensor Fusion for better adaptivity, noise reduction and information prioritization. We present preliminary works in this direction. We complement this survey with a curated repository listing all the surveyed papers, each with a brief summary of the solution and the code base when available: https://github.com/DTU-PAS/awesome-dynn-for-cv .

Dynamic and static components in scenes often exhibit distinct properties, yet most 4D reconstruction methods treat them indiscriminately, leading to suboptimal performance in both cases. This work introduces SDD-4DGS, the first framework for static-dynamic decoupled 4D scene reconstruction based on Gaussian Splatting. Our approach is built upon a novel probabilistic dynamic perception coefficient that is naturally integrated into the Gaussian reconstruction pipeline, enabling adaptive separation of static and dynamic components. With carefully designed implementation strategies to realize this theoretical framework, our method effectively facilitates explicit learning of motion patterns for dynamic elements while maintaining geometric stability for static structures. Extensive experiments on five benchmark datasets demonstrate that SDD-4DGS consistently outperforms state-of-the-art methods in reconstruction fidelity, with enhanced detail restoration for static structures and precise modeling of dynamic motions. The code will be released.

Online novel view synthesis remains challenging, requiring robust scene reconstruction from sequential, often unposed, observations. We present ReCoSplat, an autoregressive feed-forward Gaussian Splatting model supporting posed or unposed inputs, with or without camera intrinsics. While assembling local Gaussians using camera poses scales better than canonical-space prediction, it creates a dilemma during training: using ground-truth poses ensures stability but causes a distribution mismatch when predicted poses are used at inference. To address this, we introduce a Render-and-Compare (ReCo) module. ReCo renders the current reconstruction from the predicted viewpoint and compares it with the incoming observation, providing a stable conditioning signal that compensates for pose errors. To support long sequences, we propose a hybrid KV cache compression strategy combining early-layer truncation with chunk-level selective retention, reducing the KV cache size by over 90% for 100+ frames. ReCoSplat achieves state-of-the-art performance across different input settings on both in- and out-of-distribution benchmarks. Code and pretrained models will be released. Our project page is at https://freemancheng.com/ReCoSplat .

Reverse engineering binaries is required to understand and analyse programs for which the source code is unavailable. Decompilers can transform the largely unreadable binaries into a more readable source code-like representation. However, reverse engineering is time-consuming, much of which is taken up by labelling the functions with semantic information. While the automated summarisation of decompiled code can help Reverse Engineers understand and analyse binaries, current work mainly focuses on summarising source code, and no suitable dataset exists for this task. In this work, we extend large pre-trained language models of source code to summarise decompiled binary functions. Furthermore, we investigate the impact of input and data properties on the performance of such models. Our approach consists of two main components; the data and the model. We first build CAPYBARA, a dataset of 214K decompiled function-documentation pairs across various compiler optimisations. We extend CAPYBARA further by generating synthetic datasets and deduplicating the data. Next, we fine-tune the CodeT5 base model with CAPYBARA to create BinT5. BinT5 achieves the state-of-the-art BLEU-4 score of 60.83, 58.82, and 44.21 for summarising source, decompiled, and synthetically stripped decompiled code, respectively. This indicates that these models can be extended to decompiled binaries successfully. Finally, we found that the performance of BinT5 is not heavily dependent on the dataset size and compiler optimisation level. We recommend future research to further investigate transferring knowledge when working with less expressive input formats such as stripped binaries.

Modern front-end (FE) development, especially when leveraging the unique features of frameworks like React and Vue, presents distinctive challenges. These include managing modular architectures, ensuring synchronization between data and visual outputs for declarative rendering, and adapting reusable components to various scenarios. Such complexities make it particularly difficult for state-of-the-art large vision-language models (VLMs) to generate accurate and functional code directly from design images. To address these challenges, we propose a reflective agentic workflow that synthesizes high-quality image-text data to capture the diverse characteristics of FE development. This workflow automates the extraction of self-containedA \textbf{self-contained code snippet is one that encapsulates all necessary logic, styling, and dependencies, ensuring it functions independently without requiring external imports or context.} code snippets from real-world projects, renders the corresponding visual outputs, and generates detailed descriptions that link design elements to functional code. To further expand the scope and utility of the synthesis, we introduce three data synthesis strategies: Evolution-based synthesis, which enables scalable and diverse dataset expansion; Waterfall-Model-based synthesis, which generates logically coherent code derived from system requirements; and Additive Development synthesis, which iteratively increases the complexity of human-authored components. We build a large vision-language model, Flame, trained on the synthesized datasets and demonstrate its effectiveness in generating React code via the pass@k metric. Our results suggest that a code VLM trained to interpret images before code generation may achieve better performance.

Finding the optimal pass sequence of compilation can lead to a significant reduction in program size and/or improvement in program efficiency. Prior works on compilation pass ordering have two major drawbacks. They either require an excessive budget (in terms of compilation steps) at compile time or fail to generalize to unseen programs. In this paper, for code-size reduction tasks, we propose a novel pipeline to find program-dependent pass sequences within 45 compilation calls. It first identifies a coreset of 50 pass sequences via greedy optimization of a submodular function, and then learns a policy with Graph Neural Network (GNN) to pick the optimal sequence by predicting the normalized values of the pass sequences in the coreset. Despite its simplicity, our pipeline outperforms the default -Oz flag by an average of 4.7% over a large collection (4683) of unseen code repositories from diverse domains across 14 datasets. In comparison, previous approaches like reinforcement learning on the raw pass sequence space may take days to train due to sparse reward, and may not generalize well in held-out ones from different domains. Our results demonstrate that existing human-designed compiler flags can be improved with a simple yet effective technique that transforms the raw action space into a small one with denser rewards.

This work studies how to adaptively recompute key-value (KV) caches for diffusion large language models (DLMs) to maximize prediction accuracy while minimizing decoding latency. Prior methods' decoders recompute QKV for all tokens at every denoising step and layer, despite KV states changing little across most steps, especially in shallow layers, leading to substantial redundancy. We make three observations: (1) distant {bf MASK} tokens primarily act as a length-bias and can be cached block-wise beyond the active prediction window; (2) KV dynamics increase with depth, suggesting that selective refresh starting from deeper layers is sufficient; and (3) the most-attended token exhibits the smallest KV drift, providing a conservative lower bound on cache change for other tokens. Building on these, we propose {bf Elastic-Cache}, a training-free, architecture-agnostic strategy that jointly decides {when} to refresh (via an attention-aware drift test on the most-attended token) and {where} to refresh (via a depth-aware schedule that recomputes from a chosen layer onward while reusing shallow-layer caches and off-window MASK caches). Unlike fixed-period schemes, Elastic-Cache performs adaptive, layer-aware cache updates for diffusion LLMs, reducing redundant computation and accelerating decoding with negligible loss in generation quality. Experiments on LLaDA-Instruct, LLaDA-1.5, and LLaDA-V across mathematical reasoning and code generation tasks demonstrate consistent speedups: 8.7times on GSM8K (256 tokens), 45.1times on longer sequences, and 4.8times on HumanEval, while consistently maintaining higher accuracy than the baseline. Our method achieves significantly higher throughput (6.8times on GSM8K) than existing confidence-based approaches while preserving generation quality, enabling practical deployment of diffusion LLMs.

Leveraging recent advancements in large language models, modern neural code completion models have demonstrated the capability to generate highly accurate code suggestions. However, their massive size poses challenges in terms of computational costs and environmental impact, hindering their widespread adoption in practical scenarios. Dynamic inference emerges as a promising solution, as it allocates minimal computation during inference while maintaining the model's performance. In this research, we explore dynamic inference within the context of code completion. Initially, we conducted an empirical investigation on GPT-2, focusing on the inference capabilities of intermediate layers for code completion. We found that 54.4% of tokens can be accurately generated using just the first layer, signifying significant computational savings potential. Moreover, despite using all layers, the model still fails to predict 14.5% of tokens correctly, and the subsequent completions continued from them are rarely considered helpful, with only a 4.2% Acceptance Rate. These findings motivate our exploration of dynamic inference in code completion and inspire us to enhance it with a decision-making mechanism that stops the generation of incorrect code. We thus propose a novel dynamic inference method specifically tailored for code completion models. This method aims not only to produce correct predictions with largely reduced computation but also to prevent incorrect predictions proactively. Our extensive evaluation shows that it can averagely skip 1.7 layers out of 16 layers in the models, leading to an 11.2% speedup with only a marginal 1.1% reduction in ROUGE-L.

Mixture of Experts (MoE) models scale capacity but often suffer from representation collapse and gradient instability. We propose Dynamic Subspace Composition (DSC), a framework that approximates context-dependent weights via a state-dependent, sparse expansion of a shared basis bank. Formally, DSC models the weight update as a residual trajectory within a Star- Shaped Domain, employing a Magnitude-Gated Simplex Interpolation to ensure continuity at the identity. Unlike standard Mixture-of-LoRAs, which incurs O(M rd) parameter complexity by retrieving independent rank-r matrices, DSC constructs a compositional rank-K approximation from decoupled unit-norm basis vectors. This reduces parameter complexity to O(M d) and memory traffic to O(Kd), while Frame-Theoretic regularization and spectral constraints provide rigorous worst-case bounds on the dynamic update. The code is available at https://github. com/VladimerKhasia/DSC

We introduce 4D Motion Scaffolds (MoSca), a neural information processing system designed to reconstruct and synthesize novel views of dynamic scenes from monocular videos captured casually in the wild. To address such a challenging and ill-posed inverse problem, we leverage prior knowledge from foundational vision models, lift the video data to a novel Motion Scaffold (MoSca) representation, which compactly and smoothly encodes the underlying motions / deformations. The scene geometry and appearance are then disentangled from the deformation field, and are encoded by globally fusing the Gaussians anchored onto the MoSca and optimized via Gaussian Splatting. Additionally, camera poses can be seamlessly initialized and refined during the dynamic rendering process, without the need for other pose estimation tools. Experiments demonstrate state-of-the-art performance on dynamic rendering benchmarks.

We address the problem of synthesizing novel views from a monocular video depicting a complex dynamic scene. State-of-the-art methods based on temporally varying Neural Radiance Fields (aka dynamic NeRFs) have shown impressive results on this task. However, for long videos with complex object motions and uncontrolled camera trajectories, these methods can produce blurry or inaccurate renderings, hampering their use in real-world applications. Instead of encoding the entire dynamic scene within the weights of MLPs, we present a new approach that addresses these limitations by adopting a volumetric image-based rendering framework that synthesizes new viewpoints by aggregating features from nearby views in a scene-motion-aware manner. Our system retains the advantages of prior methods in its ability to model complex scenes and view-dependent effects, but also enables synthesizing photo-realistic novel views from long videos featuring complex scene dynamics with unconstrained camera trajectories. We demonstrate significant improvements over state-of-the-art methods on dynamic scene datasets, and also apply our approach to in-the-wild videos with challenging camera and object motion, where prior methods fail to produce high-quality renderings. Our project webpage is at dynibar.github.io.

Large Language Models (LLMs) have exhibited exceptional performance in software engineering yet face challenges in adapting to continually evolving code knowledge, particularly regarding the frequent updates of third-party library APIs. This limitation, stemming from static pre-training datasets, often results in non-executable code or implementations with suboptimal safety and efficiency. To this end, this paper introduces CODESYNC, a data engine for identifying outdated code patterns and collecting real-time code knowledge updates from Python third-party libraries. Building upon CODESYNC, we develop CODESYNCBENCH, a comprehensive benchmark for assessing LLMs' ability to stay synchronized with code evolution, which covers real-world updates for 220 APIs from six Python libraries. Our benchmark offers 3,300 test cases across three evaluation tasks and an update-aware instruction tuning dataset consisting of 2,200 training samples. Extensive experiments on 14 state-of-the-art LLMs reveal that they struggle with dynamic code evolution, even with the support of advanced knowledge updating methods (e.g., DPO, ORPO, and SimPO). We believe that our benchmark can offer a strong foundation for the development of more effective methods for real-time code knowledge updating in the future. The experimental code and dataset are publicly available at: https://github.com/Lucky-voyage/Code-Sync.

Modern code generation has made significant strides in functional correctness and execution efficiency. However, these systems often overlook a critical dimension in real-world software development: maintainability. To handle dynamic requirements with minimal rework, we propose MaintainCoder as a pioneering solution. It integrates the Waterfall model, design patterns, and multi-agent collaboration to systematically enhance cohesion, reduce coupling, achieving clear responsibility boundaries and better maintainability. We also introduce MaintainCoder, a benchmark comprising requirement changes and novel dynamic metrics on maintenance efforts. Experiments demonstrate that existing code generation methods struggle to meet maintainability standards when requirements evolve. In contrast, MaintainCoder improves dynamic maintainability metrics by more than 60% with even higher correctness of initial codes. Furthermore, while static metrics fail to accurately reflect maintainability and even contradict each other, our proposed dynamic metrics exhibit high consistency. Our work not only provides the foundation for maintainable code generation, but also highlights the need for more realistic and comprehensive code generation research. Resources: https://github.com/IAAR-Shanghai/MaintainCoder.

Modern diffusion models generate high-quality images and videos, but their iterative denoising process makes inference expensive. Feature caching accelerates sampling by reusing or predicting intermediate activations across neighboring denoising steps, exploiting the redundancy of computations along the reverse trajectory. In this work, we focus on the caching schedule: selecting which denoising steps should be fully recomputed. Existing schedules are either fixed (e.g. uniform) or chosen adaptively from per-step error heuristics; in both cases, the actual compute cost is a side-effect of hand-tuned thresholds rather than a quantity the user can specify. We propose ReCache, which inverts this: given a target budget k, it learns the recomputation schedule that maximizes generation quality, turning compute into a directly controllable input. ReCache trains via policy gradients, sidestepping backpropagation through full diffusion inference, and uses no labelled data. Generations from uncached inference serve as matching targets, paired with a reward for generation quality. ReCache is compatible with any caching mechanism, including feature reuse and feature forecasting; for each mechanism, a single trained policy adapts across computational budgets at inference time. ReCache consistently outperforms scheduling baselines: under a times5.04 FLOPs reduction on FLUX, it reduces LPIPS by 31% (from 0.456 to 0.316) compared to DiCache; on Wan 2.1 at a sim times2.6 speedup, it drops LPIPS by 65% (from 0.480 to 0.169) and boosts the VBench score by 7% (5.6 points, from 70.4 to 76.0) over uniform HiCache. Code is available at https://github.com/thecrazymage/ReCache.

Camera control has been actively studied in text or image conditioned video generation tasks. However, altering camera trajectories of a given video remains under-explored, despite its importance in the field of video creation. It is non-trivial due to the extra constraints of maintaining multiple-frame appearance and dynamic synchronization. To address this, we present ReCamMaster, a camera-controlled generative video re-rendering framework that reproduces the dynamic scene of an input video at novel camera trajectories. The core innovation lies in harnessing the generative capabilities of pre-trained text-to-video models through a simple yet powerful video conditioning mechanism -- its capability often overlooked in current research. To overcome the scarcity of qualified training data, we construct a comprehensive multi-camera synchronized video dataset using Unreal Engine 5, which is carefully curated to follow real-world filming characteristics, covering diverse scenes and camera movements. It helps the model generalize to in-the-wild videos. Lastly, we further improve the robustness to diverse inputs through a meticulously designed training strategy. Extensive experiments tell that our method substantially outperforms existing state-of-the-art approaches and strong baselines. Our method also finds promising applications in video stabilization, super-resolution, and outpainting. Project page: https://jianhongbai.github.io/ReCamMaster/

High Dynamic Range Novel View Synthesis (HDR NVS) seeks to learn an HDR 3D model from Low Dynamic Range (LDR) training images captured under conventional imaging conditions. Current methods primarily focus on static scenes, implicitly assuming all scene elements remain stationary and non-living. However, real-world scenarios frequently feature dynamic elements, such as moving objects, varying lighting conditions, and other temporal events, thereby presenting a significantly more challenging scenario. To address this gap, we propose a more realistic problem named HDR Dynamic Novel View Synthesis (HDR DNVS), where the additional dimension ``Dynamic'' emphasizes the necessity of jointly modeling temporal radiance variations alongside sophisticated 3D translation between LDR and HDR. To tackle this complex, intertwined challenge, we introduce HDR-4DGS, a Gaussian Splatting-based architecture featured with an innovative dynamic tone-mapping module that explicitly connects HDR and LDR domains, maintaining temporal radiance coherence by dynamically adapting tone-mapping functions according to the evolving radiance distributions across the temporal dimension. As a result, HDR-4DGS achieves both temporal radiance consistency and spatially accurate color translation, enabling photorealistic HDR renderings from arbitrary viewpoints and time instances. Extensive experiments demonstrate that HDR-4DGS surpasses existing state-of-the-art methods in both quantitative performance and visual fidelity. Source code will be released.

LLM agents are rapidly evolving from coding assistants into autonomous software engineering systems. However, existing evaluation methodologies remain largely centered on static, isolated, and short-horizon benchmarks that fail to capture the dynamic complexity of real-world production workflows. As a result, benchmark performance may poorly reflect practical capability under realistic runtime environments involving long execution chains, tool interactions, dependency management, and iterative feedback loops. We thus present RAMP, a production-grounded infrastructure for assessing long-horizon software engineering agents. Built upon the YatCC integrated platform, RAMP provides a unified runtime assessment architecture through standardized orchestration and execution interfaces. RAMP introduces realistic compiler-construction workloads with serial dependencies and complex toolchain interactions, together with a staged recovery mechanism for analyzing execution behavior under partial workflow failure. The framework further incorporates utility-oriented multi-dimensional metrics that jointly evaluate outcome quality and process efficiency. We conduct runtime assessments across 15 mainstream models and observe substantial capability degradation that remains largely invisible to conventional isolated benchmarks. Task completion rates progressively collapse across serial workflows, dropping from 100% in the initial stage to only 20% in the final stage, while none of the evaluated models successfully completes the entire pipeline. Runtime analysis reveals systematic failure propagation and significant resource inefficiencies, with computational costs differing by up to three orders of magnitude among comparable models. These findings suggest RAMP advances agentic model evaluation toward continuous, runtime-observable, and production-grounded assessment.

VIBETENSOR is an open-source research system software stack for deep learning, generated by LLM-powered coding agents under high-level human guidance. In this paper, "fully generated" refers to code provenance: implementation changes were produced and applied as agent-proposed diffs; validation relied on agent-run builds, tests, and differential checks, without per-change manual diff review. It implements a PyTorch-style eager tensor library with a C++20 core (CPU+CUDA), a torch-like Python overlay via nanobind, and an experimental Node.js/TypeScript interface. Unlike thin bindings, VIBETENSOR includes its own tensor/storage system, schema-lite dispatcher, reverse-mode autograd, CUDA runtime (streams/events/graphs), a stream-ordered caching allocator with diagnostics, and a stable C ABI for dynamically loaded operator plugins. We view this release as a milestone for AI-assisted software engineering: it shows coding agents can generate a coherent deep learning runtime spanning language bindings down to CUDA memory management, validated primarily by builds and tests. We describe the architecture, summarize the workflow used to produce and validate the system, and evaluate the artifact. We report repository scale and test-suite composition, and summarize reproducible microbenchmarks from an accompanying AI-generated kernel suite, including fused attention versus PyTorch SDPA/FlashAttention. We also report end-to-end training sanity checks on 3 small workloads (sequence reversal, ViT, miniGPT) on NVIDIA H100 (Hopper, SM90) and Blackwell-class GPUs; multi-GPU results are Blackwell-only and use an optional CUTLASS-based ring-allreduce plugin gated on CUDA 13+ and sm103a toolchain support. Finally, we discuss failure modes in generated system software, including a "Frankenstein" composition effect where locally correct subsystems interact to yield globally suboptimal performance.

The In-context generation paradigm recently has demonstrated strong power in instructional image editing with both data efficiency and synthesis quality. Nevertheless, shaping such in-context learning for instruction-based video editing is not trivial. Without specifying editing regions, the results can suffer from the problem of inaccurate editing regions and the token interference between editing and non-editing areas during denoising. To address these, we present ReCo, a new instructional video editing paradigm that novelly delves into constraint modeling between editing and non-editing regions during in-context generation. Technically, ReCo width-wise concatenates source and target video for joint denoising. To calibrate video diffusion learning, ReCo capitalizes on two regularization terms, i.e., latent and attention regularization, conducting on one-step backward denoised latents and attention maps, respectively. The former increases the latent discrepancy of the editing region between source and target videos while reducing that of non-editing areas, emphasizing the modification on editing area and alleviating outside unexpected content generation. The latter suppresses the attention of tokens in the editing region to the tokens in counterpart of the source video, thereby mitigating their interference during novel object generation in target video. Furthermore, we propose a large-scale, high-quality video editing dataset, i.e., ReCo-Data, comprising 500K instruction-video pairs to benefit model training. Extensive experiments conducted on four major instruction-based video editing tasks demonstrate the superiority of our proposal.

The ability of CodeLLMs to generate executable and functionally correct code at the repository-level scale remains largely unexplored. We introduce RepoExec, a novel benchmark for evaluating code generation at the repository-level scale. RepoExec focuses on three main aspects: executability, functional correctness through automated test case generation with high coverage rate, and carefully crafted cross-file contexts to accurately generate code. Our work explores a controlled scenario where developers specify necessary code dependencies, challenging the model to integrate these accurately. Experiments show that while pretrained LLMs outperform instruction-tuned models in correctness, the latter excel in utilizing provided dependencies and demonstrating debugging capabilities. We also introduce a new instruction-tuned dataset that focuses on code dependencies and demonstrate that CodeLLMs fine-tuned on our dataset have a better capability to leverage these dependencies effectively. RepoExec aims to provide a comprehensive evaluation of code functionality and alignment with developer intent, paving the way for more reliable and applicable CodeLLMs in real-world scenarios. The dataset and source code can be found at~https://github.com/FSoft-AI4Code/RepoExec.

A key strength of managed runtimes over hardware is the ability to gain detailed insight into the dynamic execution of programs with instrumentation. Analyses such as code coverage, execution frequency, tracing, and debugging, are all made easier in a virtual setting. As a portable, low-level bytecode, WebAssembly offers inexpensive in-process sandboxing with high performance. Yet to date, Wasm engines have not offered much insight into executing programs, supporting at best bytecode-level stepping and basic source maps, but no instrumentation capabilities. In this paper, we show the first non-intrusive dynamic instrumentation system for WebAssembly in the open-source Wizard Research Engine. Our innovative design offers a flexible, complete hierarchy of instrumentation primitives that support building high-level, complex analyses in terms of low-level, programmable probes. In contrast to emulation or machine code instrumentation, injecting probes at the bytecode level increases expressiveness and vastly simplifies the implementation by reusing the engine's JIT compiler, interpreter, and deoptimization mechanism rather than building new ones. Wizard supports both dynamic instrumentation insertion and removal while providing consistency guarantees, which is key to composing multiple analyses without interference. We detail a fully-featured implementation in a high-performance multi-tier Wasm engine, show novel optimizations specifically designed to minimize instrumentation overhead, and evaluate performance characteristics under load from various analyses. This design is well-suited for production engine adoption as probes can be implemented to have no impact on production performance when not in use.

We present Lean Refactor, a plug-and-play retrieval-augmented agentic framework for multi-objective, controllable, and version-robust refactoring of Lean proofs. LLM-generated proofs are notoriously correct-but-verbose and brittle across library versions, yet existing refactoring works overlook three practical challenges: 1) Lean refactoring is natively multi-objective (proof length, compilation cost, and version compatibility are often in tension); 2) Lean repositories have fragile compatibility, whereas LLM releases are unaware of Lean/Mathlib versions; 3) Training-based pipelines require repeated fine-tuning with each new LLM release, scaling neither with model churn nor with Lean's release cycle. Lean Refactor steers a frozen agentic LLM with retrievals from a curated database of multi-objective refactoring strategies, each densely annotated with metadata such as supported Lean/Mathlib versions and expected compilation-cost reduction. Experiments show over 70% token-level compression on competition benchmarks, over 20% on research repositories, and up to 60% compilation-time reduction, outperforming prior work and Claude Code. Version-filtered retrieval further improves compression on the target Lean version, and refactored miniF2F proofs exhibit stronger zero-shot version transfer to future Lean releases than their unrefactored counterparts.

Controlled video generation has seen drastic improvements in recent years. However, editing actions and dynamic events, or inserting contents that should affect the behaviors of other objects in real-world videos, remains a major challenge. Existing trained models struggle with complex edits, likely due to the difficulty of collecting relevant training data. Similarly, existing training-free methods are inherently restricted to structure- and motion-preserving edits and do not support modification of motion or interactions. Here, we introduce DynaEdit, a training-free editing method that unlocks versatile video editing capabilities with pretrained text-to-video flow models. Our method relies on the recently introduced inversion-free approach, which does not intervene in the model internals, and is thus model-agnostic. We show that naively attempting to adapt this approach to general unconstrained editing results in severe low-frequency misalignment and high-frequency jitter. We explain the sources for these phenomena and introduce novel mechanisms for overcoming them. Through extensive experiments, we show that DynaEdit achieves state-of-the-art results on complex text-based video editing tasks, including modifying actions, inserting objects that interact with the scene, and introducing global effects.

Large-scale LLM pretraining now runs across 10^5--10^6 accelerators, making failures routine and elasticity mandatory. We posit that an elastic-native training system must jointly deliver (i) parameter consistency, (ii) low mean time to recovery (MTTR), (iii) high post-change throughput, and (iv) computation consistency. No prior system achieves all four simultaneously. To achieve these goals, we present ElasWave, which delivers per-step fault tolerance via multi-dimensional scheduling across graph, dataflow, DVFS, and RNG. ElasWave reshapes and reshards micro-batches while preserving the global batch size and gradient scale. It performs online pipeline resharding with asynchronous parameter migration and interleaves ZeRO partitions, reducing parameter recovery processes to disjoint rank-to-rank transfers. It further leverages DVFS to absorb pipeline bubbles and reshards RNG to keep computation consistency. Together, a dynamic communicator enables in-place communication group edits, while per-step in-memory snapshots support online verification and redistribution. We evaluate ElasWave on 96 NPUs and benchmark it against state-of-the-art baselines: throughput improves by 1.35times over ReCycle and 1.60times over TorchFT; communicator recovery completes within one second (up to 82times/3.6times faster than full/partial rebuilds); migration MTTR drops by as much as 51%; and convergence deviation is reduced by approximately 78%.

Efficient experiment reproduction is critical to accelerating progress in artificial intelligence. However, the inherent complexity of method design and training procedures presents substantial challenges for automation. Notably, reproducing experiments often requires implicit domain-specific knowledge not explicitly documented in the original papers. To address this, we introduce the paper lineage algorithm, which identifies and extracts implicit knowledge from the relevant references cited by the target paper. Building on this idea, we propose AutoReproduce, a multi-agent framework capable of automatically reproducing experiments described in research papers in an end-to-end manner. AutoReproduce enhances code executability by generating unit tests alongside the reproduction process. To evaluate the reproduction capability, we construct ReproduceBench, a benchmark annotated with verified implementations, and introduce novel evaluation metrics to assess both the reproduction and execution fidelity. Experimental results demonstrate that AutoReproduce outperforms the existing strong agent baselines on all five evaluation metrics by a peak margin of over 70%. In particular, compared to the official implementations, AutoReproduce achieves an average performance gap of 22.1% on 89.74% of the executable experiment runs. The code will be available at https://github.com/AI9Stars/AutoReproduce.

Brain-to-image decoding has been recently propelled by the progress in generative AI models and the availability of large ultra-high field functional Magnetic Resonance Imaging (fMRI). However, current approaches depend on complicated multi-stage pipelines and preprocessing steps that typically collapse the temporal dimension of brain recordings, thereby limiting time-resolved brain decoders. Here, we introduce Dynadiff (Dynamic Neural Activity Diffusion for Image Reconstruction), a new single-stage diffusion model designed for reconstructing images from dynamically evolving fMRI recordings. Our approach offers three main contributions. First, Dynadiff simplifies training as compared to existing approaches. Second, our model outperforms state-of-the-art models on time-resolved fMRI signals, especially on high-level semantic image reconstruction metrics, while remaining competitive on preprocessed fMRI data that collapse time. Third, this approach allows a precise characterization of the evolution of image representations in brain activity. Overall, this work lays the foundation for time-resolved brain-to-image decoding.

The key-value (KV) cache is widely treated as essential state in transformer inference, and a large body of work engineers policies to compress, evict, or approximate its entries. We prove that this state is entirely redundant: keys and values at every layer are deterministic projections of the residual stream, and recomputing them from a single residual vector per token incurs exactly zero reconstruction error, not approximately, but bit-identically. We verify this across six models from four architecture families (135M to 4B parameters). Cross-task residual patching at every layer produces D_KL = 0 between patched and original output distributions, confirming that the residual stream satisfies a Markov property and is the sole information-carrying state. Removing the cache entirely and recomputing from scratch yields token-identical output under greedy decoding on all models tested. We build on this result with KV-Direct, a bounded-memory inference scheme that checkpoints residual vectors (5 KB per token on Gemma 3-4B) instead of full KV pairs (136 KB), recomputing keys and values on demand. Over 20 conversation turns, KV-Direct holds peak memory at 42 MB while the standard cache grows past 103 MB. Against five eviction baselines (H2O, StreamingLLM, SnapKV, TOVA, window-only), KV-Direct maintains 100% token match at every cache budget; all baselines degrade to 5-28%. A per-operation latency analysis shows recomputation runs up to 5x faster than reading cached tensors at moderate batch sizes. Code is available at https://github.com/Kaleemullahqasim/KV-Direct.

Acquiring high-quality instruction-code pairs is essential for training Large Language Models (LLMs) for code generation. Manually curated data is expensive and inherently limited in scale, motivating the development of code-centric synthesis methods. Yet, current approaches either focus on augmenting existing code or rely on predefined heuristics, both lacking rigorous data validation, which results in synthetic data that is ungrounded, repetitive, or overly simplistic. Inspired by collaborative programming practices, we propose CodeEvo, a framework that synthesizes code data through iterative interactions between two LLM agents: a Coder, which generates candidate code and test cases based on given instructions, and a Reviewer, which guides the synthesis process by producing new instructions and feedback. We further introduce a hybrid feedback mechanism that combines compiler determinism with the generative flexibility of agents, enabling automatic quality control throughout synthesis. Extensive experiments demonstrate that models fine-tuned on CodeEvo data significantly outperform established baselines across code generation benchmarks with various difficulties. In-depth analyses further provide insights from multiple perspectives into effective code-centric data synthesis.

The performance of an algorithm often critically depends on its parameter configuration. While a variety of automated algorithm configuration methods have been proposed to relieve users from the tedious and error-prone task of manually tuning parameters, there is still a lot of untapped potential as the learned configuration is static, i.e., parameter settings remain fixed throughout the run. However, it has been shown that some algorithm parameters are best adjusted dynamically during execution, e.g., to adapt to the current part of the optimization landscape. Thus far, this is most commonly achieved through hand-crafted heuristics. A promising recent alternative is to automatically learn such dynamic parameter adaptation policies from data. In this article, we give the first comprehensive account of this new field of automated dynamic algorithm configuration (DAC), present a series of recent advances, and provide a solid foundation for future research in this field. Specifically, we (i) situate DAC in the broader historical context of AI research; (ii) formalize DAC as a computational problem; (iii) identify the methods used in prior-art to tackle this problem; (iv) conduct empirical case studies for using DAC in evolutionary optimization, AI planning, and machine learning.

Existing methods for the 4D reconstruction of general, non-rigidly deforming objects focus on novel-view synthesis and neglect correspondences. However, time consistency enables advanced downstream tasks like 3D editing, motion analysis, or virtual-asset creation. We propose SceNeRFlow to reconstruct a general, non-rigid scene in a time-consistent manner. Our dynamic-NeRF method takes multi-view RGB videos and background images from static cameras with known camera parameters as input. It then reconstructs the deformations of an estimated canonical model of the geometry and appearance in an online fashion. Since this canonical model is time-invariant, we obtain correspondences even for long-term, long-range motions. We employ neural scene representations to parametrize the components of our method. Like prior dynamic-NeRF methods, we use a backwards deformation model. We find non-trivial adaptations of this model necessary to handle larger motions: We decompose the deformations into a strongly regularized coarse component and a weakly regularized fine component, where the coarse component also extends the deformation field into the space surrounding the object, which enables tracking over time. We show experimentally that, unlike prior work that only handles small motion, our method enables the reconstruction of studio-scale motions.

Novel view synthesis has long been a practical but challenging task, although the introduction of numerous methods to solve this problem, even combining advanced representations like 3D Gaussian Splatting, they still struggle to recover high-quality results and often consume too much storage memory and training time. In this paper we propose Swift4D, a divide-and-conquer 3D Gaussian Splatting method that can handle static and dynamic primitives separately, achieving a good trade-off between rendering quality and efficiency, motivated by the fact that most of the scene is the static primitive and does not require additional dynamic properties. Concretely, we focus on modeling dynamic transformations only for the dynamic primitives which benefits both efficiency and quality. We first employ a learnable decomposition strategy to separate the primitives, which relies on an additional parameter to classify primitives as static or dynamic. For the dynamic primitives, we employ a compact multi-resolution 4D Hash mapper to transform these primitives from canonical space into deformation space at each timestamp, and then mix the static and dynamic primitives to produce the final output. This divide-and-conquer method facilitates efficient training and reduces storage redundancy. Our method not only achieves state-of-the-art rendering quality while being 20X faster in training than previous SOTA methods with a minimum storage requirement of only 30MB on real-world datasets. Code is available at https://github.com/WuJH2001/swift4d.

Large language model (LLM)-based systems are becoming increasingly popular for solving tasks by constructing executable workflows that interleave LLM calls, information retrieval, tool use, code execution, memory updates, and verification. This survey reviews recent methods for designing and optimizing such workflows, which we treat as agentic computation graphs (ACGs). We organize the literature based on when workflow structure is determined, where structure refers to which components or agents are present, how they depend on each other, and how information flows between them. This lens distinguishes static methods, which fix a reusable workflow scaffold before deployment, from dynamic methods, which select, generate, or revise the workflow for a particular run before or during execution. We further organize prior work along three dimensions: when structure is determined, what part of the workflow is optimized, and which evaluation signals guide optimization (e.g., task metrics, verifier signals, preferences, or trace-derived feedback). We also distinguish reusable workflow templates, run-specific realized graphs, and execution traces, separating reusable design choices from the structures actually deployed in a given run and from realized runtime behavior. Finally, we outline a structure-aware evaluation perspective that complements downstream task metrics with graph-level properties, execution cost, robustness, and structural variation across inputs. Our goal is to provide a clear vocabulary, a unified framework for positioning new methods, a more comparable view of existing body of literature, and a more reproducible evaluation standard for future work in workflow optimizations for LLM agents.

In LLM inference, the same prompt may yield different outputs across different runs. At the system level, this non-determinism arises from floating-point non-associativity combined with dynamic batching and GPU kernels whose reduction orders vary with batch size. A straightforward way to eliminate non-determinism is to disable dynamic batching during inference, but doing so severely degrades throughput. Another approach is to make kernels batch-invariant; however, this tightly couples determinism to kernel design, requiring new implementations. This coupling also imposes fixed runtime overheads, regardless of how much of the workload actually requires determinism. Inspired by ideas from speculative decoding, we present LLM-42, a scheduling-based approach to enable determinism in LLM inference. Our key observation is that if a sequence is in a consistent state, the next emitted token is likely to be consistent even with dynamic batching. Moreover, most GPU kernels use shape-consistent reductions. Leveraging these insights, LLM-42 decodes tokens using a non-deterministic fast path and enforces determinism via a lightweight verify-rollback loop. The verifier replays candidate tokens under a fixed-shape reduction schedule, commits those that are guaranteed to be consistent across runs, and rolls back those violating determinism. LLM-42 mostly re-uses existing kernels unchanged and incurs overhead only in proportion to the traffic that requires determinism.

LLM-based evolution has emerged as a promising way to improve agents by refining non-parametric artifacts, but its wall-clock cost remains a major bottleneck. We identify that this cost comes from synchronized stage execution and imbalance inside each LLM-heavy stage. We present FlashEvolve, an efficient framework that replaces synchronized execution with asynchronous workers and queues, allowing different stages and steps to overlap. To handle data staleness introduced by asynchrony, FlashEvolve tracks artifact versions and applies different policies to update, discard, or patch stale artifacts. Unlike weight-space staleness in asynchronous RL, language-space staleness is inspectable and repairable: a stale artifact is not just delayed work, but readable evidence that the LLM can reflect on, revise, and turn into useful evolution signal. FlashEvolve further improves throughput and token efficiency with speculative stage completion and adaptive workflow control. On GEPA workloads, FlashEvolve improves proposal throughput by 3.5times on local vLLM and 4.9times on API serving over synchronous GEPA. The same design also applies to ACE and Meta-Harness.

Scaling multi-dimensional transformers to long sequences is indispensable across various domains. However, the challenges of large memory requirements and slow speeds of such sequences necessitate sequence parallelism. All existing approaches fall under the category of embedded sequence parallelism, which are limited to shard along a single sequence dimension, thereby introducing significant communication overhead. However, the nature of multi-dimensional transformers involves independent calculations across multiple sequence dimensions. To this end, we propose Dynamic Sequence Parallelism (DSP) as a novel abstraction of sequence parallelism. DSP dynamically switches the parallel dimension among all sequences according to the computation stage with efficient resharding strategy. DSP offers significant reductions in communication costs, adaptability across modules, and ease of implementation with minimal constraints. Experimental evaluations demonstrate DSP's superiority over state-of-the-art embedded sequence parallelism methods by remarkable throughput improvements ranging from 32.2% to 10x, with less than 25% communication volume.

Diffusion Transformers (DiTs) power high-fidelity video world models but remain computationally expensive due to sequential denoising and costly spatio-temporal attention. Training-free feature caching accelerates inference by reusing intermediate activations across denoising steps; however, existing methods largely rely on a Zero-Order Hold assumption i.e., reusing cached features as static snapshots when global drift is small. This often leads to ghosting artifacts, blur, and motion inconsistencies in dynamic scenes. We propose WorldCache, a Perception-Constrained Dynamical Caching framework that improves both when and how to reuse features. WorldCache introduces motion-adaptive thresholds, saliency-weighted drift estimation, optimal approximation via blending and warping, and phase-aware threshold scheduling across diffusion steps. Our cohesive approach enables adaptive, motion-consistent feature reuse without retraining. On Cosmos-Predict2.5-2B evaluated on PAI-Bench, WorldCache achieves 2.3times inference speedup while preserving 99.4\% of baseline quality, substantially outperforming prior training-free caching approaches. Our code can be accessed on https://umair1221.github.io/World-Cache/{World-Cache}.

Large language models for code generation often need to use APIs that are absent from their pretraining data. This requires more than recalling a function name: models must coordinate signatures, module paths, input-output contracts, semantics, and executable usage patterns. Existing novel-API benchmarks are typically static, rely on coarse pass/fail metrics, or use synthetic APIs that may not reflect real library evolution. We introduce NovelAPIBench, a fully automated dynamic benchmark that, for any base model and target library, discovers novel APIs, extracts decomposed knowledge bundles, generates executable coding tasks, and assigns failed samples to six diagnostic categories. Across about 1.9K tasks, four base models, and five domains, we compare knowledge injected through retrieval with knowledge internalized through parametric adaptation. We find that knowledge components are not interchangeable: usage examples are the strongest standalone signal, while the best two-component setting pairs signatures with either mechanisms or examples depending on the domain and backbone. Adding more context, especially source code, can hurt by increasing import-path errors. Parametric adaptation also does not replace retrieval once external knowledge is removed; rather, fine-tuning mainly teaches models how to use provided bundles, and this ability transfers to held-out libraries. These results suggest that retrieval and tuning play complementary roles: retrieval supplies volatile API content, while tuning improves procedural integration.

Traditional benchmarks for large language models (LLMs) typically rely on static evaluations through storytelling or opinion expression, which fail to capture the dynamic requirements of real-time information processing in contemporary applications. To address this limitation, we present DynamicBench, a benchmark designed to evaluate the proficiency of LLMs in storing and processing up-to-the-minute data. DynamicBench utilizes a dual-path retrieval pipeline, integrating web searches with local report databases. It necessitates domain-specific knowledge, ensuring accurate responses report generation within specialized fields. By evaluating models in scenarios that either provide or withhold external documents, DynamicBench effectively measures their capability to independently process recent information or leverage contextual enhancements. Additionally, we introduce an advanced report generation system adept at managing dynamic information synthesis. Our experimental results confirm the efficacy of our approach, with our method achieving state-of-the-art performance, surpassing GPT4o in document-free and document-assisted scenarios by 7.0% and 5.8%, respectively. The code and data will be made publicly available.

Neural inductive program synthesis is a task generating instructions that can produce desired outputs from given inputs. In this paper, we focus on the generation of a chunk of assembly code that can be executed to match a state change inside the CPU and RAM. We develop a neural program synthesis algorithm, AutoAssemblet, learned via self-learning reinforcement learning that explores the large code space efficiently. Policy networks and value networks are learned to reduce the breadth and depth of the Monte Carlo Tree Search, resulting in better synthesis performance. We also propose an effective multi-entropy policy sampling technique to alleviate online update correlations. We apply AutoAssemblet to basic programming tasks and show significant higher success rates compared to several competing baselines.

As mathematical computing becomes more democratized in high-level languages, high-performance symbolic-numeric systems are necessary for domain scientists and engineers to get the best performance out of their machine without deep knowledge of code optimization. Naturally, users need different term types either to have different algebraic properties for them, or to use efficient data structures. To this end, we developed Symbolics.jl, an extendable symbolic system which uses dynamic multiple dispatch to change behavior depending on the domain needs. In this work we detail an underlying abstract term interface which allows for speed without sacrificing generality. We show that by formalizing a generic API on actions independent of implementation, we can retroactively add optimized data structures to our system without changing the pre-existing term rewriters. We showcase how this can be used to optimize term construction and give a 113x acceleration on general symbolic transformations. Further, we show that such a generic API allows for complementary term-rewriting implementations. We demonstrate the ability to swap between classical term-rewriting simplifiers and e-graph-based term-rewriting simplifiers. We showcase an e-graph ruleset which minimizes the number of CPU cycles during expression evaluation, and demonstrate how it simplifies a real-world reaction-network simulation to halve the runtime. Additionally, we show a reaction-diffusion partial differential equation solver which is able to be automatically converted into symbolic expressions via multiple dispatch tracing, which is subsequently accelerated and parallelized to give a 157x simulation speedup. Together, this presents Symbolics.jl as a next-generation symbolic-numeric computing environment geared towards modeling and simulation.

Software engineers mainly write code by editing existing programs. In contrast, large language models (LLMs) autoregressively synthesize programs in a single pass. One explanation for this is the scarcity of open-sourced edit data. While high-quality instruction data for code synthesis is already scarce, high-quality edit data is even scarcer. To fill this gap, we develop a synthetic data generation algorithm called LintSeq. This algorithm refactors existing code into a sequence of code edits by using a linter to procedurally sample across the error-free insertions that can be used to sequentially write programs. It outputs edit sequences as text strings consisting of consecutive program diffs. To test LintSeq, we use it to refactor a dataset of instruction + program pairs into instruction + program-diff-sequence tuples. Then, we instruction finetune a series of smaller LLMs ranging from 2.6B to 14B parameters on both the re-factored and original versions of this dataset, comparing zero-shot performance on code synthesis benchmarks. We show that during repeated sampling, edit sequence finetuned models produce more diverse programs than baselines. This results in better inference-time scaling for benchmark coverage as a function of samples, i.e. the fraction of problems "pass@k" solved by any attempt given "k" tries. For example, on HumanEval pass@50, small LLMs finetuned on synthetic edit sequences are competitive with GPT-4 and outperform models finetuned on the baseline dataset by +20% (+/-3%) in absolute score. Finally, we also pretrain our own tiny LMs for code understanding. We show that finetuning tiny models on synthetic code edits results in state-of-the-art code synthesis for the on-device model class. Our 150M parameter edit sequence LM matches or outperforms code models with twice as many parameters, both with and without repeated sampling, including Codex and AlphaCode.

We present methodology for using dynamic evaluation to improve neural sequence models. Models are adapted to recent history via a gradient descent based mechanism, causing them to assign higher probabilities to re-occurring sequential patterns. Dynamic evaluation outperforms existing adaptation approaches in our comparisons. Dynamic evaluation improves the state-of-the-art word-level perplexities on the Penn Treebank and WikiText-2 datasets to 51.1 and 44.3 respectively, and the state-of-the-art character-level cross-entropies on the text8 and Hutter Prize datasets to 1.19 bits/char and 1.08 bits/char respectively.

This paper presents VLCache, a cache reuse framework that exploits both Key-Value (KV) cache and encoder cache from prior multimodal inputs to eliminate costly recomputation when the same multimodal inputs recur. Unlike previous heuristic approaches, we formally identify the cumulative reuse error effect and demonstrate how to minimize the non-prefix cache reuse error effectively. We further analyze the varying importance of model layers and propose a dynamic, layer-aware recomputation strategy to balance accuracy and efficiency. Experimental results show that VLCache achieves an accuracy on par with full recomputation, while requiring only 2-5% of the tokens to compute, yielding 1.2x-16x TTFT speedups. The proposed VLCache pipeline has been integrated into SGLang, enabling significantly faster inference in practical deployments.

Despite recent progress, video diffusion models still struggle to synthesize realistic videos involving highly dynamic motions or requiring fine-grained motion controllability. A central limitation lies in the scarcity of such examples in commonly used training datasets. To address this, we introduce DynaVid, a video synthesis framework that leverages synthetic motion data in training, which is represented as optical flow and rendered using computer graphics pipelines. This approach offers two key advantages. First, synthetic motion offers diverse motion patterns and precise control signals that are difficult to obtain from real data. Second, unlike rendered videos with artificial appearances, rendered optical flow encodes only motion and is decoupled from appearance, thereby preventing models from reproducing the unnatural look of synthetic videos. Building on this idea, DynaVid adopts a two-stage generation framework: a motion generator first synthesizes motion, and then a motion-guided video generator produces video frames conditioned on that motion. This decoupled formulation enables the model to learn dynamic motion patterns from synthetic data while preserving visual realism from real-world videos. We validate our framework on two challenging scenarios, vigorous human motion generation and extreme camera motion control, where existing datasets are particularly limited. Extensive experiments demonstrate that DynaVid improves the realism and controllability in dynamic motion generation and camera motion control.

Reinforcement Learning with Verifiable Rewards (RLVR) has recently emerged as the cornerstone for shaping the remarkable coding abilities of Large Language Models (LLMs). However, the scalability of RLVR is severely constrained by the scarcity of sufficiently challenging verifiable code tasks that target near the model's edge of competence. Prior studies often rely on heuristic seed expansions for data synthesis, which severely limits both novelty and difficulty. Consequently, the training value of such data fails to scale proportionally with the size of its synthesis. To this end, we propose Atomic Decomposition and Recombination (ADR), a novel framework that generates verifiable code tasks via decomposition into atomic elements and controlled recombination, thereby enabling the generation of genuinely novel and challenging verifiable code tasks. Experiments and analysis demonstrate that ADR achieves superior originality, difficulty, diversity, and test quality over existing baselines, and consistently delivers greater improvements in code ability across RLVR in diverse downstream domains, including algorithmic programming, tool usage, and data science. Our work sheds light on a new paradigm for novel code task synthesis and scalable RLVR training.

Large language models (LLMs) are increasingly asked not only to write static interfaces, but to construct executable interactive worlds from natural language. Browser-native 3D, commonly built with Three.js, is a natural next frontier: generated programs must integrate assets, obey spatial and physical constraints, and keep user-facing controls synchronized with hidden runtime state. Existing web-generation benchmarks and evaluators, however, largely observe only pixels or DOM nodes, while the mechanics of a Three.js world unfold inside an opaque <canvas>. We introduce WorldCoder-Bench, a benchmark for autonomous, physically grounded 3D world synthesis. WorldCoder-Bench contains 2,026 expert-curated tasks across Simulation, Rendering, and Application scenarios, with optional .glb assets and hidden behavioral contracts. We further propose StateProbe, an execution-based protocol that probes generated programs in a sandboxed browser and verifies hidden, mutation-hardened contracts over runtime states and transitions. Beyond verification coverage, we report Return on Automation and Time Efficiency Multiplier to measure correctness-adjusted cost and time savings. Across nine frontier models, the best system reaches only 27.8% verification coverage on WorldCoder-Core and 19.9% on WorldCoder-Robust, with failures dominated by state-schema drift and broken interaction chains rather than missing scene elements. Utility metrics further show that cheap or fast models can still provide substantial value on easier domains. WorldCoder-Bench is available at https://anonymous.4open.science/r/WorldCoder-Bench/.

Diffusion models have gradually gained prominence in the field of image synthesis, showcasing remarkable generative capabilities. Nevertheless, the slow inference and complex networks, resulting from redundancy at both temporal and structural levels, hinder their low-latency applications in real-world scenarios. Current acceleration methods for diffusion models focus separately on temporal and structural levels. However, independent optimization at each level to further push the acceleration limits results in significant performance degradation. On the other hand, integrating optimizations at both levels can compound the acceleration effects. Unfortunately, we find that the optimizations at these two levels are not entirely orthogonal. Performing separate optimizations and then simply integrating them results in unsatisfactory performance. To tackle this issue, we propose CacheQuant, a novel training-free paradigm that comprehensively accelerates diffusion models by jointly optimizing model caching and quantization techniques. Specifically, we employ a dynamic programming approach to determine the optimal cache schedule, in which the properties of caching and quantization are carefully considered to minimize errors. Additionally, we propose decoupled error correction to further mitigate the coupled and accumulated errors step by step. Experimental results show that CacheQuant achieves a 5.18 speedup and 4 compression for Stable Diffusion on MS-COCO, with only a 0.02 loss in CLIP score. Our code are open-sourced: https://github.com/BienLuky/CacheQuant .

Dynamic scene reconstruction from multi-view videos remains a fundamental challenge in computer vision. While recent neural surface reconstruction methods have achieved remarkable results in static 3D reconstruction, extending these approaches with comparable quality for dynamic scenes introduces significant computational and representational challenges. Existing dynamic methods focus on novel-view synthesis, therefore, their extracted meshes tend to be noisy. Even approaches aiming for geometric fidelity often result in too smooth meshes due to the ill-posedness of the problem. We present a novel framework for highly detailed dynamic reconstruction that extends the static 3D reconstruction method NeuralAngelo to work in dynamic settings. To that end, we start with a high-quality template scene reconstruction from the initial frame using NeuralAngelo, and then jointly optimize deformation fields that track the template and refine it based on the temporal sequence. This flexible template allows updating the geometry to include changes that cannot be modeled with the deformation field, for instance occluded parts or the changes in the topology. We show superior reconstruction accuracy in comparison to previous state-of-the-art methods on the ActorsHQ dataset.

Multimodal agents repeatedly re-examine the same video frames, UI screenshots, and rendered artifacts as their context window slides and reasoning iterates, yet every look-back re-encodes from scratch, because prefix caches serve reuse only at a fixed leading position. We show this recompute is avoidable, and identify exactly what naive KV reuse loses: the cross-chunk conditioning a chunk absorbs from its neighbours. This loss is asymmetric. The direct readout of a cached chunk is recovered exactly and for free by the standard state-merge. What remains is a diffuse, low-rank residue concentrated in deep layers, invisible to single-hop retrieval but precisely what multi-hop reasoning binds on. Blind reuse therefore leaves single-hop recall intact while halving multi-hop accuracy; this is the failure mode prior position-independent caches, designed for single-context or single-image reuse, do not address. We repair it with a small, training-free low-rank conditioning patch stored alongside each position-free chunk. Reuse reduces to one operator across MLA, GQA, and MHA: exact RoPE re-rotation to any target position, plus the patch that restores cross-chunk binding. This makes three window operations cheap: reorder (one patch serves every ordering of a cached set), sliding-window survival (surviving chunks relocate via rotation only, zero re-encode), and recall (an evicted chunk is rehydrated by its patch, never re-encoded). A rank-m patch recovers full task accuracy on cross-chunk-binding benchmarks, MM-NIAH across two attention families and two-page doc-QA, at a fraction of the KV footprint, and reconstructs re-prefill KV to within bf16 rounding in a production SGLang kernel across six backbones. The conditioning signal is strongest in redundant vision and video streams, making our solution most impactful where multimodal agents spend their recompute budget.

In recent years, Large Language Models (LLMs) have demonstrated remarkable capabilities across a wide array of text-centric tasks. However, their `large' scale introduces significant computational and storage challenges, particularly in managing the key-value states of the transformer, which limits their wider applicability. Therefore, we propose to adaptively release resources from caches and rebuild the necessary key-value states. Particularly, we accomplish this by a lightweight controller module to approximate an ideal top-K sparse attention. This module retains the tokens with the highest top-K attention weights and simultaneously rebuilds the discarded but necessary tokens, which may become essential for future decoding. Comprehensive experiments in natural language generation and modeling reveal that our method is not only competitive with full attention in terms of performance but also achieves a significant throughput improvement of up to 221.8%. The code for replication is available on the https://github.com/WHUIR/ADORE.

Transformers have emerged as the backbone of large language models (LLMs). However, generation remains inefficient due to the need to store in memory a cache of key-value representations for past tokens, whose size scales linearly with the input sequence length and batch size. As a solution, we propose Dynamic Memory Compression (DMC), a method for on-line key-value cache compression at inference time. Most importantly, the model learns to apply different compression rates in different heads and layers. We retrofit pre-trained LLMs such as Llama 2 (7B, 13B and 70B) into DMC Transformers, achieving up to ~3.7x throughput increase in auto-regressive inference on a NVIDIA H100 GPU. DMC is applied via continued pre-training on a negligible percentage of the original data without adding any extra parameters. We find that DMC preserves the original downstream performance with up to 4x cache compression, outperforming up-trained grouped-query attention (GQA). GQA and DMC can be even combined to obtain compounded gains. As a result DMC fits longer contexts and larger batches within any given memory budget.

Mixture-of-Experts (MoE) models have shown remarkable capability in instruction tuning, especially when the number of tasks scales. However, previous methods simply merge all training tasks (e.g. creative writing, coding, and mathematics) and apply fixed sampling weights, without considering the importance of different tasks as the model training state changes. In this way, the most helpful data cannot be effectively distinguished, leading to suboptimal model performance. To reduce the potential redundancies of datasets, we make the first attempt and propose a novel dynamic data mixture for MoE instruction tuning. Specifically, inspired by MoE's token routing preference, we build dataset-level representations and then capture the subtle differences among datasets. Finally, we propose to dynamically adjust the sampling weight of datasets by their inter-redundancies, thus maximizing global performance under a limited training budget. The experimental results on two MoE models demonstrate the effectiveness of our approach on both downstream knowledge \& reasoning tasks and open-ended queries. Code and models are available at https://github.com/Spico197/MoE-SFT .

We propose patching for large language models (LLMs) like software versions, a lightweight and modular approach for addressing safety vulnerabilities. While vendors release improved LLM versions, major releases are costly, infrequent, and difficult to tailor to customer needs, leaving released models with known safety gaps. Unlike full-model fine-tuning or major version updates, our method enables rapid remediation by prepending a compact, learnable prefix to an existing model. This "patch" introduces only 0.003% additional parameters, yet reliably steers model behavior toward that of a safer reference model. Across three critical domains (toxicity mitigation, bias reduction, and harmfulness refusal) policy patches achieve safety improvements comparable to next-generation safety-aligned models while preserving fluency. Our results demonstrate that LLMs can be "patched" much like software, offering vendors and practitioners a practical mechanism for distributing scalable, efficient, and composable safety updates between major model releases.

Not a day goes by without hearing about the impressive feats of large language models (LLMs), and equally, not a day passes without hearing about their challenges. LLMs are notoriously vulnerable to biases in their dataset, leading to issues such as toxicity. While domain-adaptive training has been employed to mitigate these issues, these techniques often address all model parameters indiscriminately during the repair process, resulting in poor repair quality and reduced model versatility. In this paper, we introduce a novel dynamic slicing-based intent-aware LLM repair strategy, IRepair. This approach selectively targets the most error-prone sections of the model for repair. Specifically, we propose dynamically slicing the model's most sensitive layers that require immediate attention, concentrating repair efforts on those areas. This method enables more effective repairs with potentially less impact on the model's overall performance by altering a smaller portion of the model. We evaluated our technique on three models from the GPT2 and GPT-Neo families, with parameters ranging from 800M to 1.6B, in a toxicity mitigation setup. Our results show that IRepair repairs errors 43.6% more effectively while causing 46% less disruption to general performance compared to the closest baseline, direct preference optimization. Our empirical analysis also reveals that errors are more concentrated in a smaller section of the model, with the top 20% of layers exhibiting 773% more error density than the remaining 80\%. This highlights the need for selective repair. Additionally, we demonstrate that a dynamic selection approach is essential for addressing errors dispersed throughout the model, ensuring a robust and efficient repair.

Decompilation is widely used in reverse engineering to recover high-level language code from binary executables. While recent approaches leveraging Large Language Models (LLMs) have shown promising progress, they typically treat assembly code as a linear sequence of instructions, overlooking arbitrary jump patterns and isolated data segments inherent to binary files. This limitation significantly hinders their ability to correctly infer source code semantics from assembly code. To address this limitation, we propose \saltm, a novel binary decompilation method that abstracts stable logical features shared between binary and source code. The core idea of \saltm is to abstract selected binary-level operations, such as specific jumps, into a high-level logic framework that better guides LLMs in semantic recovery. Given a binary function, \saltm constructs a Source-level Abstract Logic Tree (\salt) from assembly code to approximate the logic structure of high-level language. It then fine-tunes an LLM using the reconstructed \salt to generate decompiled code. Finally, the output is refined through error correction and symbol recovery to improve readability and correctness. We compare \saltm to three categories of baselines (general-purpose LLMs, commercial decompilers, and decompilation methods) using three well-known datasets (Decompile-Eval, MBPP, Exebench). Our experimental results demonstrate that \saltm is highly effective in recovering the logic of the source code, significantly outperforming state-of-the-art methods (e.g., 70.4\% TCP rate on Decompile-Eval with a 10.6\% improvement). The results further validate its robustness against four commonly used obfuscation techniques. Additionally, analyses of real-world software and a user study confirm that our decompiled output offers superior assistance to human analysts in comprehending binary functions.

Large language models (LLMs) show the promise in supporting scientific research implementation, yet their ability to generate correct and executable code remains limited. Existing works largely adopt one-shot settings, ignoring the iterative and feedback-driven nature of realistic workflows of scientific research development. To address this gap, we present RECODE-H, a benchmark of 102 tasks from research papers and repositories that evaluates LLM agents through multi-turn interactions with LLM-simulated human feedback. It includes structured instructions,unit tests, and a five-level feedback hierarchy to reflect realistic researcher-agent collaboration. We further present ReCodeAgent, a framework that integrates feedback into iterative code generation. Experiments with leading LLMs, including GPT-5, Claude-Sonnet-4, DeepSeek-V3.1, and Gemini 2.5, show substantial performance gains with richer feedback, while also highlighting ongoing challenges in the generation of complex research code. RECODE-H establishes a foundation for developing adaptive, feedback-driven LLM agents in scientific research implementation

We explore the novel application of Large Language Models to code optimization. We present a 7B-parameter transformer model trained from scratch to optimize LLVM assembly for code size. The model takes as input unoptimized assembly and outputs a list of compiler options to best optimize the program. Crucially, during training, we ask the model to predict the instruction counts before and after optimization, and the optimized code itself. These auxiliary learning tasks significantly improve the optimization performance of the model and improve the model's depth of understanding. We evaluate on a large suite of test programs. Our approach achieves a 3.0% improvement in reducing instruction counts over the compiler, outperforming two state-of-the-art baselines that require thousands of compilations. Furthermore, the model shows surprisingly strong code reasoning abilities, generating compilable code 91% of the time and perfectly emulating the output of the compiler 70% of the time.

Despite recent progress made by large language models in code generation, they still struggle with programs that meet complex requirements. Recent work utilizes plan-and-solve decomposition to decrease the complexity and leverage self-tests to refine the generated program. Yet, planning deep-inside requirements in advance can be challenging, and the tests need to be accurate to accomplish self-improvement. To this end, we propose FunCoder, a code generation framework incorporating the divide-and-conquer strategy with functional consensus. Specifically, FunCoder recursively branches off sub-functions as smaller goals during code generation, represented by a tree hierarchy. These sub-functions are then composited to attain more complex objectives. Additionally, we designate functions via a consensus formed by identifying similarities in program behavior, mitigating error propagation. FunCoder outperforms state-of-the-art methods by +9.8% on average in HumanEval, MBPP, xCodeEval and MATH with GPT-3.5 and GPT-4. Moreover, our method demonstrates superiority on smaller models: With FunCoder, StableCode-3b surpasses GPT-3.5 by +18.6% and achieves 97.7% of GPT-4's performance on HumanEval. Further analysis reveals that our proposed dynamic function decomposition is capable of handling complex requirements, and the functional consensus prevails over self-testing in correctness evaluation.

Code agents increasingly help developers work with unfamiliar repositories, but every such task depends on a costly prerequisite: bootstrapping the repository into a usable development state. This process requires substantial trial-and-error exploration, yet the resulting knowledge--resolved dependencies, repair strategies--stays trapped in a single conversation, unavailable to future agents. We therefore formulate repository bootstrapping as a reusable startup knowledge problem and introduce BootstrapAgent, a multi-agent framework that distills the heuristics discovered during bootstrap exploration into a persistent, verifiable, agent-consumable .bootstrap contract. Through evidence extraction, structured planning, deterministic Docker-based verification, and trace-driven repair, BootstrapAgent generates a contract covering environment setup, diagnostic checks, minimal verification, and accumulated repair knowledge. We further propose warm repair with clean replay to accelerate iterative debugging without sacrificing cold-start reproducibility, and a delta repair with sanity check to prevent reward hacking. Experiments on three benchmarks show that BootstrapAgent achieves a 92.9% success rate, outperforming the baseline by over 10% while reducing downstream agent token usage by 25.9% and build time by 22.3%. Our code is available at https://github.com/Vossera/BootstrapAgent.

Dynamic novel view synthesis aims to capture the temporal evolution of visual content within videos. Existing methods struggle to distinguishing between motion and structure, particularly in scenarios where camera poses are either unknown or constrained compared to object motion. Furthermore, with information solely from reference images, it is extremely challenging to hallucinate unseen regions that are occluded or partially observed in the given videos. To address these issues, we first finetune a pretrained RGB-D diffusion model on the video frames using a customization technique. Subsequently, we distill the knowledge from the finetuned model to a 4D representations encompassing both dynamic and static Neural Radiance Fields (NeRF) components. The proposed pipeline achieves geometric consistency while preserving the scene identity. We perform thorough experiments to evaluate the efficacy of the proposed method qualitatively and quantitatively. Our results demonstrate the robustness and utility of our approach in challenging cases, further advancing dynamic novel view synthesis.

Dynamic 3D Gaussian splatting faces a fundamental tension between motion consistency and visual fidelity. Deformation-based approaches preserve temporal correspondence but suffer from motion over-factorization, oversmoothing high-frequency dynamics. In contrast, 4D-primitive methods capture fine visual details yet incur temporal overparameterization, breaking object identity and leading to severe storage overhead. To resolve this, we introduce Multi4D, a framework for high-fidelity dynamic Gaussian Splatting based on multi-level competitive allocation. Instead of a monolithic representation, we distribute modeling capacity across three structured levels: static structure, persistent dynamic geometry, and transient appearance primitives. Through shared rasterization and residual-driven optimization, these levels dynamically compete to explain photometric error, enabling adaptive specialization without pre-assigned decomposition. This allocation preserves long-term motion consistency while capturing fine dynamic detail, achieving state-of-the-art rendering quality and real-time performance with significantly fewer dynamic primitives. Furthermore, because our representation explicitly tracks compact persistent Gaussians over time, semantic features can be embedded afterward, enabling Multi4D to achieve state-of-the-art 4D segmentation accuracy with an order-of-magnitude speedup. Project page: https://batfacewayne.github.io/Multi4D.io/

Interactive LLM agents are becoming part of daily work, but they do not reliably become easier to work with over time: a correction remembered in one session may still be violated in the next. We study this gap between preference access and preference compliance. In tasks derived from anonymized real-user friction cases, Mem0 memory still leaves 57.5% of applicable preference checks violated. We introduce Test-time Rule Acquisition and Compiled Enforcement (TRACE), a drop-in skill-layer pipeline for coding-agent runtimes that mines user corrections, rewrites them as atomic rules, and compiles them into runtime checks that must pass before an agent completes future tasks. Unlike runtime checks written ahead of time by developers, TRACE skills come from the user's own chat corrections. We evaluate TRACE with simulated user-in-the-loop experiments on ClawArena coding-agent tasks and MemoryArena-derived memory-intensive tasks. On ClawArena, TRACE reduces held-out preference violation from 100.0% to 37.6% on in-distribution tasks and from 100.0% to 2.0% on out-of-distribution tasks. On MemoryArena-derived tasks, TRACE reduces in-distribution violation from 100.0% to 60.5% while matching or exceeding the strongest memory baseline on task pass. These results suggest that compiling corrections into runtime enforcement can address a repeated-friction failure mode that memory alone does not reliably solve, reducing the need for users to restate the same correction across future sessions. Experiment code is available at https://github.com/YujunZhou/TRACE_exp, and the deployable skill is available at https://github.com/YujunZhou/tellonce.

Though rectified flow models have achieved remarkable performance in image, video, and 3D generation, their practical deployments are challenged by slow inference speeds. Prior acceleration methods reuse cached features from previous steps, which neglects the growing mismatch between static caches and the evolving input, leading to reduced output fidelity. This work proposes Velocity Decomposition and Estimation (VDE), a training-free acceleration method that shifts the paradigm from caching-and-reusing to decomposing-and-estimating. Specifically, VDE decomposes the model's velocity into components parallel and orthogonal to the input, exploiting their temporal predictability and directional stability for precise, input-adaptive estimation. To prevent error accumulation, it periodically anchors the model's state via full forward passes. Extensive experiments on image and video generation tasks demonstrate that VDE achieves substantial acceleration with minimal loss in visual quality. Notably, VDE accelerates Flux by 3.22 times and achieves an LPIPS of 0.069 on Qwen-Image, outperforming the best baseline with a 52.2% reduction.

Code completion has become an essential tool for daily software development. Existing evaluation benchmarks often employ static methods that do not fully capture the dynamic nature of real-world coding environments and face significant challenges, including limited context length, reliance on superficial evaluation metrics, and potential overfitting to training datasets. In this work, we introduce a novel framework for enhancing code completion in software development through the creation of a repository-level benchmark ExecRepoBench and the instruction corpora Repo-Instruct, aim at improving the functionality of open-source large language models (LLMs) in real-world coding scenarios that involve complex interdependencies across multiple files. ExecRepoBench includes 1.2K samples from active Python repositories. Plus, we present a multi-level grammar-based completion methodology conditioned on the abstract syntax tree to mask code fragments at various logical units (e.g. statements, expressions, and functions). Then, we fine-tune the open-source LLM with 7B parameters on Repo-Instruct to produce a strong code completion baseline model Qwen2.5-Coder-Instruct-C based on the open-source model. Qwen2.5-Coder-Instruct-C is rigorously evaluated against existing benchmarks, including MultiPL-E and ExecRepoBench, which consistently outperforms prior baselines across all programming languages. The deployment of can be used as a high-performance, local service for programming development\url{https://execrepobench.github.io/}.

Video generation models have demonstrated remarkable performance, yet their broader adoption remains constrained by slow inference speeds and substantial computational costs, primarily due to the iterative nature of the denoising process. Addressing this bottleneck is essential for democratizing advanced video synthesis technologies and enabling their integration into real-world applications. This work proposes EasyCache, a training-free acceleration framework for video diffusion models. EasyCache introduces a lightweight, runtime-adaptive caching mechanism that dynamically reuses previously computed transformation vectors, avoiding redundant computations during inference. Unlike prior approaches, EasyCache requires no offline profiling, pre-computation, or extensive parameter tuning. We conduct comprehensive studies on various large-scale video generation models, including OpenSora, Wan2.1, and HunyuanVideo. Our method achieves leading acceleration performance, reducing inference time by up to 2.1-3.3times compared to the original baselines while maintaining high visual fidelity with a significant up to 36% PSNR improvement compared to the previous SOTA method. This improvement makes our EasyCache a efficient and highly accessible solution for high-quality video generation in both research and practical applications. The code is available at https://github.com/H-EmbodVis/EasyCache.

Modern 3D engines and graphics pipelines require mesh as a memory-efficient representation, which allows efficient rendering, geometry processing, texture editing, and many other downstream operations. However, it is still highly difficult to obtain high-quality mesh in terms of detailed structure and time consistency from dynamic observations. To this end, we introduce Dynamic Gaussians Mesh (DG-Mesh), a framework to reconstruct a high-fidelity and time-consistent mesh from dynamic input. Our work leverages the recent advancement in 3D Gaussian Splatting to construct the mesh sequence with temporal consistency from dynamic observations. Building on top of this representation, DG-Mesh recovers high-quality meshes from the Gaussian points and can track the mesh vertices over time, which enables applications such as texture editing on dynamic objects. We introduce the Gaussian-Mesh Anchoring, which encourages evenly distributed Gaussians, resulting better mesh reconstruction through mesh-guided densification and pruning on the deformed Gaussians. By applying cycle-consistent deformation between the canonical and the deformed space, we can project the anchored Gaussian back to the canonical space and optimize Gaussians across all time frames. During the evaluation on different datasets, DG-Mesh provides significantly better mesh reconstruction and rendering than baselines. Project page: https://www.liuisabella.com/DG-Mesh

Code generation models have achieved impressive performance. However, they tend to be brittle as slight edits to a prompt could lead to very different generations; these robustness properties, critical for user experience when deployed in real-life applications, are not well understood. Most existing works on robustness in text or code tasks have focused on classification, while robustness in generation tasks is an uncharted area and to date there is no comprehensive benchmark for robustness in code generation. In this paper, we propose ReCode, a comprehensive robustness evaluation benchmark for code generation models. We customize over 30 transformations specifically for code on docstrings, function and variable names, code syntax, and code format. They are carefully designed to be natural in real-life coding practice, preserve the original semantic meaning, and thus provide multifaceted assessments of a model's robustness performance. With human annotators, we verified that over 90% of the perturbed prompts do not alter the semantic meaning of the original prompt. In addition, we define robustness metrics for code generation models considering the worst-case behavior under each type of perturbation, taking advantage of the fact that executing the generated code can serve as objective evaluation. We demonstrate ReCode on SOTA models using HumanEval, MBPP, as well as function completion tasks derived from them. Interesting observations include: better robustness for CodeGen over InCoder and GPT-J; models are most sensitive to syntax perturbations; more challenging robustness evaluation on MBPP over HumanEval.

Data refinement involves executing multi-step recipes over evolving text states, where both composition and execution order of processing operators determine the outcome. While existing benchmarks either isolate text editing or entangle it with code and tool execution, it remains unclear whether LLMs can directly and faithfully execute these compositional, order-sensitive data refinement recipes. To fill this gap, we introduce CDR-Bench, a comprehensive benchmark featuring 3,462 high-quality tasks spanning four real-world data refinement domains and 29 distinct operators. Our benchmark evaluates models across atomic, order-agnostic, and order-sensitive settings, leveraging deterministic reference outputs to enable exact evaluation. Experiments on 10+ state-of-the-art LLMs reveal consistent failure patterns: performance degrades sharply in compositional settings, and order-sensitive recipe success collapses. These findings underline that current LLMs lack the procedural faithfulness required for reliable compositional data refinement.

To improve the efficiency of distributed large language model (LLM) inference, various parallelization strategies, such as tensor and pipeline parallelism, have been proposed. However, the distinct computational characteristics inherent in the two stages of LLM inference-prefilling and decoding-render a single static parallelization strategy insufficient for the effective optimization of both stages. In this work, we present Seesaw, an LLM inference engine optimized for throughput-oriented tasks. The key idea behind Seesaw is dynamic model re-sharding, a technique that facilitates the dynamic reconfiguration of parallelization strategies across stages, thereby maximizing throughput at both phases. To mitigate re-sharding overhead and optimize computational efficiency, we employ tiered KV cache buffering and transition-minimizing scheduling. These approaches work synergistically to reduce the overhead caused by frequent stage transitions while ensuring maximum batching efficiency. Our evaluation demonstrates that Seesaw achieves a throughput increase of up to 1.78x (1.36x on average) compared to vLLM, the most widely used state-of-the-art LLM inference engine.

Virtual Analog (VA) modeling aims to simulate the behavior of hardware circuits via algorithms to replicate their tone digitally. Dynamic Range Compressor (DRC) is an audio processing module that controls the dynamics of a track by reducing and amplifying the volumes of loud and quiet sounds, which is essential in music production. In recent years, neural-network-based VA modeling has shown great potential in producing high-fidelity models. However, due to the lack of data quantity and diversity, their generalization ability in different parameter settings and input sounds is still limited. To tackle this problem, we present Diff-SSL-G-Comp, the first large-scale and diverse dataset for modeling the SSL 500 G-Bus Compressor. Specifically, we manually collected 175 unmastered songs from the Cambridge Multitrack Library. We recorded the compressed audio in 220 parameter combinations, resulting in an extensive 2528-hour dataset with diverse genres, instruments, tempos, and keys. Moreover, to facilitate the use of our proposed dataset, we conducted benchmark experiments in various open-sourced black-box and grey-box models, as well as white-box plugins. We also conducted ablation studies in different data subsets to illustrate the effectiveness of improved data diversity and quantity. The dataset and demos are on our project page: http://www.yichenggu.com/DiffSSLGComp/.

Large Language Models (LLMs) rely heavily on Key-Value (KV) caching to minimize inference latency. However, standard KV caches are context-dependent: reusing a cached document in a new context requires recomputing KV states to account for shifts in attention distribution. Existing solutions such as CacheBlend, EPIC, and SAM-KV mitigate this issue by selectively recomputing a subset of tokens; however, they still incur non-negligible computational overhead (FLOPs) and increased Time-to-First-Token (TTFT) latency. In this paper, we propose KV Packet, a recomputation-free cache reuse framework that treats cached documents as immutable ``packets'' wrapped in light-weight trainable soft-token adapters, which are trained via self-supervised distillation to bridge context discontinuities. Experiments on Llama-3.1 and Qwen2.5 demonstrate that the proposed KV Packet method achieves near-zero FLOPs and lower TTFT than recomputation-based baselines, while retaining F1 scores comparable to those of the full recomputation baseline.

Despite their impressive performance on complex tasks, current language models (LMs) typically operate in a vacuum: Each input query is processed separately, without retaining insights from previous attempts. Here, we present Dynamic Cheatsheet (DC), a lightweight framework that endows a black-box LM with a persistent, evolving memory. Rather than repeatedly re-discovering or re-committing the same solutions and mistakes, DC enables models to store and reuse accumulated strategies, code snippets, and general problem-solving insights at inference time. This test-time learning enhances performance substantially across a range of tasks without needing explicit ground-truth labels or human feedback. Leveraging DC, Claude 3.5 Sonnet's accuracy more than doubled on AIME math exams once it began retaining algebraic insights across questions. Similarly, GPT-4o's success rate on Game of 24 increased from 10% to 99% after the model discovered and reused a Python-based solution. In tasks prone to arithmetic mistakes, such as balancing equations, DC enabled GPT-4o and Claude to reach near-perfect accuracy by recalling previously validated code, whereas their baselines stagnated around 50%. Beyond arithmetic challenges, DC yields notable accuracy gains on knowledge-demanding tasks. Claude achieved a 9% improvement in GPQA-Diamond and an 8% boost on MMLU-Pro problems. Crucially, DC's memory is self-curated, focusing on concise, transferable snippets rather than entire transcript. Unlike finetuning or static retrieval methods, DC adapts LMs' problem-solving skills on the fly, without modifying their underlying parameters. Overall, our findings present DC as a promising approach for augmenting LMs with persistent memory, bridging the divide between isolated inference events and the cumulative, experience-driven learning characteristic of human cognition.

Most existing pre-trained language models for source code focus on learning the static code text, typically augmented with static code structures (abstract syntax tree, dependency graphs, etc.). However, program semantics will not be fully exposed before the real execution. Without an understanding of the program execution, statically pre-trained models fail to comprehensively capture the dynamic code properties, such as the branch coverage and the runtime variable values, and they are consequently less effective at code understanding tasks, such as retrieving semantic clones and detecting software vulnerabilities. To close the gap between the static nature of language models and the dynamic characteristics of programs, we introduce TRACED, an execution-aware pre-training strategy for source code. Specifically, we pre-train code language models with a combination of source code, executable inputs, and corresponding execution traces. Our goal is to teach code models the complicated execution logic during the pre-training, enabling the model to statically estimate the dynamic code properties without repeatedly executing code during task-specific fine-tuning. To illustrate the effectiveness of our proposed approach, we fine-tune and evaluate TRACED on three downstream tasks: static execution estimation, clone retrieval, and vulnerability detection. The empirical results show that TRACED relatively improves the statically pre-trained code models by 12.4% for complete execution path prediction and by 25.2% for runtime variable value predictions. TRACED also significantly outperforms statically pre-trained models in clone retrieval and vulnerability detection across four public benchmarks.

Recent large-scale generative models learned on big data are capable of synthesizing incredible images yet suffer from limited controllability. This work offers a new generation paradigm that allows flexible control of the output image, such as spatial layout and palette, while maintaining the synthesis quality and model creativity. With compositionality as the core idea, we first decompose an image into representative factors, and then train a diffusion model with all these factors as the conditions to recompose the input. At the inference stage, the rich intermediate representations work as composable elements, leading to a huge design space (i.e., exponentially proportional to the number of decomposed factors) for customizable content creation. It is noteworthy that our approach, which we call Composer, supports various levels of conditions, such as text description as the global information, depth map and sketch as the local guidance, color histogram for low-level details, etc. Besides improving controllability, we confirm that Composer serves as a general framework and facilitates a wide range of classical generative tasks without retraining. Code and models will be made available.

Unsupervised learning of object-centric representations in dynamic visual scenes is challenging. Unlike most previous approaches that learn to decompose 2D images, we present DynaVol, a 3D scene generative model that unifies geometric structures and object-centric learning in a differentiable volume rendering framework. The key idea is to perform object-centric voxelization to capture the 3D nature of the scene, which infers the probability distribution over objects at individual spatial locations. These voxel features evolve over time through a canonical-space deformation function, forming the basis for global representation learning via slot attention. The voxel features and global features are complementary and are both leveraged by a compositional NeRF decoder for volume rendering. DynaVol remarkably outperforms existing approaches for unsupervised dynamic scene decomposition. Once trained, the explicitly meaningful voxel features enable additional capabilities that 2D scene decomposition methods cannot achieve: it is possible to freely edit the geometric shapes or manipulate the motion trajectories of the objects.

In this work, we investigate a typical scenario in code generation where a developer edits existing code in real time and requests a code assistant, e.g., a large language model, to re-predict the next token or next line on the fly. Naively, the LLM needs to re-encode the entire KV cache to provide an accurate prediction. However, this process is computationally expensive, especially when the sequence length is long. Simply encoding the edited subsequence and integrating it to the original KV cache meets the temporal confusion problem, leading to significantly worse performance. We address this efficiency and accuracy trade-off by introducing \textbf{Positional \textbf{Integrity Encoding} (PIE). Building upon the rotary positional encoding, PIE first removes the rotary matrices in the Key cache that introduce temporal confusion and then reapplies the correct rotary matrices. This process ensures that positional relationships between tokens are correct and requires only a single round of matrix multiplication. We validate the effectiveness of PIE through extensive experiments on the RepoBench-C-8k dataset, utilizing DeepSeek-Coder models with 1.3B, 6.7B, and 33B parameters. Our evaluation includes three real-world coding tasks: code insertion, code deletion, and multi-place code editing. Results demonstrate that PIE reduces computational overhead by over 85% compared to the standard full recomputation approach across all model sizes and tasks while well approximating the model performance.

The emergence of Diffusion Transformers (DiT) has brought significant advancements to video generation, especially in text-to-video and image-to-video tasks. Although video generation is widely applied in various fields, most existing models are limited to single scenarios and cannot perform diverse video generation and editing through dynamic content manipulation. We propose OmniV2V, a video model capable of generating and editing videos across different scenarios based on various operations, including: object movement, object addition, mask-guided video edit, try-on, inpainting, outpainting, human animation, and controllable character video synthesis. We explore a unified dynamic content manipulation injection module, which effectively integrates the requirements of the above tasks. In addition, we design a visual-text instruction module based on LLaVA, enabling the model to effectively understand the correspondence between visual content and instructions. Furthermore, we build a comprehensive multi-task data processing system. Since there is data overlap among various tasks, this system can efficiently provide data augmentation. Using this system, we construct a multi-type, multi-scenario OmniV2V dataset and its corresponding OmniV2V-Test benchmark. Extensive experiments show that OmniV2V works as well as, and sometimes better than, the best existing open-source and commercial models for many video generation and editing tasks.

Large Language Models (LLMs) have recently shown remarkable progress in code generation, yet their ability to construct complete software repositories from scratch remains poorly understood. A fundamental bottleneck is the lack of verifiable and scalable evaluation: existing benchmarks either focus on patch-based editing or rely on human or LLM-based judgments, which introduce bias and limit reproducibility. In this work, we present RepoZero, the first benchmark that enables fully automated, execution-based verification of repository-level generation from scratch. Our key idea is to reformulate generation as repository reproduction: given only API specifications, an agent must re-implement an entire repository such that its behavior matches the original implementation. This design allows for strict black-box validation via output equivalence, while naturally supporting large-scale construction by reusing existing open-source repositories. To further mitigate data leakage and shortcut solutions, we introduce cross-language constraints and a sandboxed evaluation protocol. Building on this benchmark, we propose an Agentic Code-Test Evolution (ACE) framework that performs iterative test generation and error-driven refinement, enabling effective test-time scaling for repository-level synthesis. Extensive experiments across multiple state-of-the-art LLMs and agent frameworks reveal that even the strongest LLM agents achieve only limited pass rates (30\% - 55\%), exposing a substantial gap between current capabilities and real-world software development requirements. Our results establish RepoZero as a challenging, scalable, and reliable testbed for end-to-end code generation, and highlight self-verification via test generation as a critical direction for advancing LLM-based coding agents.

Reliable handling of code diffs is central to agents that edit and refactor repositories at scale. We introduce Diff-XYZ, a compact benchmark for code-diff understanding with three supervised tasks: apply (old code + diff rightarrow new code), anti-apply (new code - diff rightarrow old code), and diff generation (new code - old code rightarrow diff). Instances in the benchmark are triples langle old code, new code, diff rangle drawn from real commits in CommitPackFT, paired with automatic metrics and a clear evaluation protocol. We use the benchmark to do a focused empirical study of the unified diff format and run a cross-format comparison of different diff representations. Our findings reveal that different formats should be used depending on the use case and model size. For example, representing diffs in search-replace format is good for larger models in the diff generation scenario, yet not suited well for diff analysis and smaller models. The Diff-XYZ benchmark is a reusable foundation for assessing and improving diff handling in LLMs that can aid future development of diff formats and models editing code. The dataset is published on HuggingFace Hub: https://huggingface.co/datasets/JetBrains-Research/diff-xyz.

We introduce QualityFlow, a dynamic agentic workflow for program synthesis. Given the English description of a programming problem and a set of unit tests, the model's goal is to synthesize the correct program that solves the problem and passes the tests. QualityFlow includes large language model (LLM) agents resembling a software development team, including code generation, testing, and self-debugging. We propose the LLM Quality Checker, which explicitly "imagines" whether the synthesized programs' execution would conform to the unit tests. The Quality Checks dynamically control the workflow, including actions to submit the final answer, clarify the problem statement, and revert previous workflow steps. Our experiments show that the Quality Checker can precisely accept any correct program, mitigate faulty synthesized tests, and prevent potential workflow deviation. QualityFlow establishes the state-of-the-art results on four program synthesis benchmarks: MBPP, HumanEval, and stricter evaluations from MBPP-EvalPlus and HumanEval-EvalPlus.

Dynamic languages (such as Python and JavaScript) offer flexibility and simplified type handling for programming, but this can also lead to an increase in type-related errors and additional overhead for compile-time type inference. As a result, type inference for dynamic languages has become a popular research area. Existing approaches typically achieve type inference through static analysis, machine learning, or large language models (LLMs). However, current work only focuses on the direct dependencies of variables related to type inference as the context, resulting in incomplete contextual information and thus affecting the accuracy of type inference. To address this issue, this paper proposes a method called TypePro, which leverages LLMs for type inference in dynamic languages. TypePro supplements contextual information by conducting inter-procedural code slicing. Then, TypePro proposes a set of candidate complex types based on the structural information of data types implied in the slices, thereby addressing the lack of domain knowledge of LLMs. We conducted experiments on the ManyTypes4Py and ManyTypes4TypeScript datasets, achieving Top-1 exact match (EM) rates of 88.9% and 86.6%, respectively. Notably, TypePro improves the Top-1 Exact Match by 7.1 and 10.3 percentage points over the second-best approach, showing the effectiveness and robustness of TypePro.

Achieving spatial intelligence requires moving beyond visual plausibility to build world simulators grounded in physical laws. While coding LLMs have advanced static 3D scene generation, extending this paradigm to 4D dynamics remains a critical frontier. This task presents two fundamental challenges: multi-scale context entanglement, where monolithic generation fails to balance local object structures with global environmental layouts; and a semantic-physical execution gap, where open-loop code generation leads to physical hallucinations lacking dynamic fidelity. We introduce Code2Worlds, a framework that formulates 4D generation as language-to-simulation code generation. First, we propose a dual-stream architecture that disentangles retrieval-augmented object generation from hierarchical environmental orchestration. Second, to ensure dynamic fidelity, we establish a physics-aware closed-loop mechanism in which a PostProcess Agent scripts dynamics, coupled with a VLM-Motion Critic that performs self-reflection to iteratively refine simulation code. Evaluations on the Code4D benchmark show Code2Worlds outperforms baselines with a 41% SGS gain and 49% higher Richness, while uniquely generating physics-aware dynamics absent in prior static methods. Code: https://github.com/AIGeeksGroup/Code2Worlds. Website: https://aigeeksgroup.github.io/Code2Worlds.

3D Gaussian Splatting (3D-GS) enables real-time rendering but struggles with fast motion due to low temporal resolution of RGB cameras. To address this, we introduce the first approach combining event cameras, which capture high-temporal-resolution, continuous motion data, with deformable 3D-GS for fast dynamic scene reconstruction. We observe that threshold modeling for events plays a crucial role in achieving high-quality reconstruction. Therefore, we propose a GS-Threshold Joint Modeling (GTJM) strategy, creating a mutually reinforcing process that greatly improves both 3D reconstruction and threshold modeling. Moreover, we introduce a Dynamic-Static Decomposition (DSD) strategy that first identifies dynamic areas by exploiting the inability of static Gaussians to represent motions, then applies a buffer-based soft decomposition to separate dynamic and static areas. This strategy accelerates rendering by avoiding unnecessary deformation in static areas, and focuses on dynamic areas to enhance fidelity. Our approach achieves high-fidelity dynamic reconstruction at 156 FPS with a 400times400 resolution on an RTX 3090 GPU.

LLMs can solve program synthesis tasks but remain inefficient and unreliable on hard instances requiring large combinatorial search. Given a small set of reasoning traces, we use coding agents to compile them into reusable symbolic program synthesizers over constrained DSLs. The resulting solvers require no LLM calls at test time and are strong standalone systems: symbolic solver ensembles reach 91.3% accuracy on PBEBench-Lite and 84.7% on PBEBench-Hard, outperforming LLMs with test-time scaling for the latter by +16.3 percentage points at zero LLM inference cost. They also complement LLM search, improving PBEBench-Hard accuracy from 68.4% to 85.8% while reducing reported token usage by 78%, and raising SLR-Bench hard-tier accuracy from 34.4% to 58.0% in a neuro-symbolic hybrid setting. Compared to directly using coding agents as per-instance solvers, induced solvers are substantially more Pareto-efficient, amortizing a small one-time construction cost over many zero-token executions. Finally, most solvers transfer zero-shot to a real historical linguistics task - predicting sound changes in natural language data - reaching 80.1% accuracy under ensembling and recovering some plausible linguistic rules. Together, these results show that reasoning traces can be compiled into reusable symbolic solvers that solve many tasks directly, complement LLM inference on hard cases, and provide a scalable route to domain-general solver induction. We release code and data for reproducibility.

We introduce Dynabench, an open-source platform for dynamic dataset creation and model benchmarking. Dynabench runs in a web browser and supports human-and-model-in-the-loop dataset creation: annotators seek to create examples that a target model will misclassify, but that another person will not. In this paper, we argue that Dynabench addresses a critical need in our community: contemporary models quickly achieve outstanding performance on benchmark tasks but nonetheless fail on simple challenge examples and falter in real-world scenarios. With Dynabench, dataset creation, model development, and model assessment can directly inform each other, leading to more robust and informative benchmarks. We report on four initial NLP tasks, illustrating these concepts and highlighting the promise of the platform, and address potential objections to dynamic benchmarking as a new standard for the field.

Diffusion Transformers (DiT) excel in video generation but encounter significant computational challenges due to the quadratic complexity of attention. Notably, attention differences between adjacent diffusion steps follow a U-shaped pattern. Current methods leverage this property by caching attention blocks, however, they still struggle with sudden error spikes and large discrepancies. To address these issues, we propose UniCP a unified caching and pruning framework for efficient video generation. UniCP optimizes both temporal and spatial dimensions through. Error Aware Dynamic Cache Window (EDCW): Dynamically adjusts cache window sizes for different blocks at various timesteps, adapting to abrupt error changes. PCA based Slicing (PCAS) and Dynamic Weight Shift (DWS): PCAS prunes redundant attention components, and DWS integrates caching and pruning by enabling dynamic switching between pruned and cached outputs. By adjusting cache windows and pruning redundant components, UniCP enhances computational efficiency and maintains video detail fidelity. Experimental results show that UniCP outperforms existing methods in both performance and efficiency.

Code completion has become a central task, gaining significant attention with the rise of large language model (LLM)-based tools in software engineering. Although recent advances have greatly improved LLMs' code completion abilities, evaluation methods have not advanced equally. Most current benchmarks focus solely on functional correctness of code completions based on given context, overlooking models' ability to follow user instructions during completion-a common scenario in LLM-assisted programming. To address this limitation, we present the first instruction-guided code completion benchmark, Controllable Code Completion Benchmark (C3-Bench), comprising 2,195 carefully designed completion tasks. Through comprehensive evaluation of over 40 mainstream LLMs across C3-Bench and conventional benchmarks, we reveal substantial gaps in instruction-following capabilities between open-source and advanced proprietary models during code completion tasks. Moreover, we develop a straightforward data synthesis pipeline that leverages Qwen2.5-Coder to generate high-quality instruction-completion pairs for supervised fine-tuning (SFT). The resulting model, Qwen2.5-Coder-C3, achieves state-of-the-art performance on C3-Bench. Our findings provide valuable insights for enhancing LLMs' code completion and instruction-following capabilities, establishing new directions for future research in code LLMs. To facilitate reproducibility and foster further research in code LLMs, we open-source all code, datasets, and models.

Dynamic garment reconstruction from monocular video is an important yet challenging task due to the complex dynamics and unconstrained nature of the garments. Recent advancements in neural rendering have enabled high-quality geometric reconstruction with image/video supervision. However, implicit representation methods that use volume rendering often provide smooth geometry and fail to model high-frequency details. While template reconstruction methods model explicit geometry, they use vertex displacement for deformation, which results in artifacts. Addressing these limitations, we propose NGD, a Neural Gradient-based Deformation method to reconstruct dynamically evolving textured garments from monocular videos. Additionally, we propose a novel adaptive remeshing strategy for modelling dynamically evolving surfaces like wrinkles and pleats of the skirt, leading to high-quality reconstruction. Finally, we learn dynamic texture maps to capture per-frame lighting and shadow effects. We provide extensive qualitative and quantitative evaluations to demonstrate significant improvements over existing SOTA methods and provide high-quality garment reconstructions.